12x18 Sintered Bronze Bushing, ISO 2795
The 12x18 sintered bronze bushing (ISO 2795) has a 12 mm bore and an 18 mm outside diameter, oil impregnated and press-fitted. Get it as 3 lengths from 8 to 20 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 12x18 oilite bushing, 12x18 sleeve bearing, 12x18 plain bearing, 12x18 self-lubricating bush, 12x18 x 8 to 12x18 x 20
- Model id:
iso2795-c-12x18
- Standard: ISO 2795:2020 · size 12x18
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 8 | iso2795-c-12x18x8 | STEP |
| 12 | iso2795-c-12x18x12 | STEP |
| 20 | iso2795-c-12x18x20 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Inside diameter | | 12 | | 12 | nominal | L2 |
| D | Outside diameter | | 18 | | 18 | nominal | L2 |
| C | Chamfer, maximum | | | 0.4 | 0.4 | single limit (max), modeled at the limit | L2 |
| C_angle | Chamfer angle | | 45 | | 45 | nominal | L1 |
Drawing

As a PDF: CC-ISO2795-SZ-12x18.pdf.
The 12x18 sintered bronze bushing beside the 10x14 and the 12x16
The 12x18 is number 19 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.
- Inside diameter (d): 12 mm on the 12x18 sintered bronze bushing, against 10 mm on the 10x14 and 12 mm on the 12x16.
- Outside diameter (D): 18 mm on the 12x18 sintered bronze bushing, against 14 mm on the 10x14 and 16 mm on the 12x16.
- Chamfer, maximum (C): up to 0.4 mm on the 12x18 sintered bronze bushing, against up to 0.3 mm on the 10x14 and up to 0.3 mm on the 12x16.
- Chamfer angle (C_angle): 45° on the 12x18 sintered bronze bushing, the same on the 10x14 and the 12x16.
Other sizes
Conventions
- Simplified only: a bush has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis, one end face at Z = 0 and the other at Z = L.
- Nominal sizes: the sources give tolerance classes, not limits (before fitting G7/G8 bore, s7/s8 outside, js13 length; H7 or H8 bore after press-fitting), so the model is the nominal part before fitting, concentric.
- A chamfer C, at C_angle from the axis, on the bore and outside edges at both ends: Table 2's maximum for the wall (D - d)/2, modeled at the limit, within the owner's quarter-wall cap.
Documents
Sources
bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...