ISO 10642 hexagon socket countersunk head screw, M3
Size drawing - M3 values on the views - | = 8 shown - enlarged 10:1
dk theo < 6.72 Thread pitch
dk = 5.54 5.54-5.81
dk theo Head diameter, theoretical (sharp)
= 1. Head diameter, actual (land) 1.522-1.86 141. 5.54-5.81
1.86 1.522-1.86
Head height
90 90-92
Head angle, deg
2.05 2.02-2.08
Socket across flats | = 8 shown
lengths 8-30 2 2.303
Socket across corners
1.1 1.1-1.25
Socket depth
= 50° (ISO 4753 CH)
> Underhead fillet radius > 6.2
2.93 2.86-3.00
18 ref Thread length
Shank diameter
d1 = 2.4587
Basic minor diameter (end face) 2.4587
tap Tap drill (method d - P)
a end End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
View from above L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1- L113 - LO 4.
Notes
dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source. s: the nominal is the key size; the socket is modeled at the middle of its band.
TITLE
'? CommunityCAD Size drawing, M3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Countersunk socket screw - M3 SHEET REV SCALE PROJECTION UNITS CC-18010642-SZ-M3 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
eb6c875b0758ced249F7398440847c26413da3e0 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
