70x15 Cooling Fan, DC Axial

STEP · STL Supports CommunityCAD0 downloads
70x15 Cooling Fan, DC Axial
1 / 6

70x15 Cooling Fan, DC Axial

A 70 mm square cooling fan, 15 mm thick, with 4.3 mm mounting holes 61.5 mm apart. It comes as simplified STEP files.

70x15 cooling fan, DC axial fan

How these parts are made, and what the levels mean: read the method

  • Also known as: 70x15 computer fan, 70x15 case fan, 70x15 DC brushless fan
  • Model id: fans-dc-axial-70x15
  • Standard: DC axial fan · size 70x15

Files

Part keySimplified
fans-dc-axial-70x15STEP

Dimensions

Dimension symbols for 70x15 cooling fans (DC axial fan)

SymbolNameminnommaxModeledRuleLevel
aFrame side7070nominalL1
tFrame thickness1515nominalL1
eMounting hole spacing61.561.5nominalL1
dhMounting hole diameter4.34.3nominalL1
kCorner flange thickness33nominalL0 (nom: one source)

Drawing

Drawing of the 70x15 cooling fan with its values (DC axial fan)

As a PDF: CC-DCFAN-SZ-70x15.pdf.

The 70x15 cooling fan beside the 60x38 and the 80x15

The 70x15 is number 11 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.

  • Frame side (a): 70 mm on the 70x15 cooling fan, against 60 mm on the 60x38 and 80 mm on the 80x15.
  • Frame thickness (t): 15 mm on the 70x15 cooling fan, against 38 mm on the 60x38 and 15.3 mm on the 80x15.
  • Mounting hole spacing (e): 61.5 mm on the 70x15 cooling fan, against 50 mm on the 60x38 and 71.5 mm on the 80x15.
  • Mounting hole diameter (dh): 4.3 mm on the 70x15 cooling fan, against 4.4 mm on the 60x38 and 4.3 mm on the 80x15.

Other sizes

Conventions

  • Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
  • Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
  • Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.

Documents

Sources

delta-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DCFAN-DS-70x15.pdf

* CC-DCFAN-DS-70x15 rev A '?) CommunityCAD Size datasheet - 70x15 70x15 DC axial fan Size datasheet: this frame's values with their levels, conventions and sources. Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings. Frame 70 mm square, 15 mm…

View full datasheet →

docs/CC-DCFAN-SZ-70x15.pdf

DC axial fan, square frame, 70x15 Size drawing - 70x15 values on the views - scale 1:1 Sym. Dimensi Frame side Frame thickness Hole spacing Hole diameter Flange thickness (open corners) Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →