30x10 Cooling Fan, DC Axial
The 30x10 cooling fan is 10 mm thick on a 30 mm square frame; it mounts by 3.2 mm mounting holes 24 mm apart. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 30x10 computer fan, 30x10 case fan, 30x10 DC brushless fan
- Model id:
fans-dc-axial-30x10
- Standard: DC axial fan · size 30x10
Files
| Part key | Simplified |
|---|
fans-dc-axial-30x10 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 30 | | 30 | nominal | L1 |
| t | Frame thickness | | 10 | | 10 | nominal | L1 |
| e | Mounting hole spacing | | 24 | | 24 | nominal | L1 |
| dh | Mounting hole diameter | | 3.2 | | 3.2 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-30x10.pdf.
From the maker's data sheet
As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.
- Series: MR3010
- Models: MR3010L, MR3010M, MR3010H, MR3010E
- Operating Voltage: 5 or 12 VDC
- Bearing option: ball bearing or sleeve
- Construction: UL94V-0 plastic impeller and frame
- Air Flow: air exhaust over struts
- Features: soft start, polarity protection, auto-restart
- Options: tachometer output or locked rotor alarm signal
The 30x10 cooling fan beside the 25x10 and the 40x10
The 30x10 is number 2 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 30 mm on the 30x10 cooling fan, against 25 mm on the 25x10 and 40 mm on the 40x10.
- Frame thickness (t): 10 mm on the 30x10 cooling fan, against 10 mm on the 25x10 and 10.3 mm on the 40x10.
- Mounting hole spacing (e): 24 mm on the 30x10 cooling fan, against 20 mm on the 25x10 and 32 mm on the 40x10.
- Mounting hole diameter (dh): 3.2 mm on the 30x10 cooling fan, against 2.8 mm on the 25x10 and 4.25 mm on the 40x10.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...