60x38 Cooling Fan, DC Axial
The 60x38 cooling fan is 38 mm thick on a 60 mm square frame; it mounts by 4.4 mm mounting holes 50 mm apart. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 60x38 computer fan, 60x38 case fan, 60x38 DC brushless fan
- Model id:
fans-dc-axial-60x38
- Standard: DC axial fan · size 60x38
Files
| Part key | Simplified |
|---|
fans-dc-axial-60x38 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 60 | | 60 | nominal | L1 |
| t | Frame thickness | | 38 | | 38 | nominal | L1 |
| e | Mounting hole spacing | | 50 | | 50 | nominal | L1 |
| dh | Mounting hole diameter | | 4.4 | | 4.4 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-60x38.pdf.
From the maker's data sheet
As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.
- Series: ME6038
- Models: ME6038S, ME6038L, ME6038M, ME6038H, ME6038E, ME6038X, ME6038U
- Bearing option: ball bearing
- Construction: UL94V-0 PBT impeller & frame
- Connection: AWG 26, UL1007 lead wires
- Frame: flanged
- Protection: thermal
- Options: tachometer output or locked rotor signal; PWM speed control
The 60x38 cooling fan beside the 60x15 and the 70x15
The 60x38 is number 10 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 60 mm on the 60x38 cooling fan, against 60 mm on the 60x15 and 70 mm on the 70x15.
- Frame thickness (t): 38 mm on the 60x38 cooling fan, against 15.3 mm on the 60x15 and 15 mm on the 70x15.
- Mounting hole spacing (e): 50 mm on the 60x38 cooling fan, against 50 mm on the 60x15 and 61.5 mm on the 70x15.
- Mounting hole diameter (dh): 4.4 mm on the 60x38 cooling fan, against 4.3 mm on the 60x15 and 4.3 mm on the 70x15.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...