vs-t-5 Extrusion Joining Plate (Joining Strip), Extrusion joining plate

The vs-t-5 extrusion joining plate (Extrusion joining plate) is 60 mm long, 20 mm wide and 4 mm thick, with 5 holes of 5.1 mm. Here in simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: vs-t-5 joining plate
• Model id: extrusion-joining-plates-vs-t-5
• Standard: Extrusion joining plate · size vs-t-5

Files

Part key	Simplified
extrusion-joining-plates-vs-t-5	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Length		60		60	nominal	L0 (nom: one source)
w	Leg width		20		20	nominal	L0 (nom: one source)
t	Thickness		4		4	nominal	L0 (nom: one source)
d	Hole diameter		5.1		5.1	nominal	L0 (nom: one source)
n	Number of holes		5		5	nominal	L0 (nom: one source)
p	Hole spacing		20		20	nominal	L0 (nom: one source)
e	Hole to end		10		10	nominal	L0 (nom: one source)
g	Hole to outer edge		10		10	nominal	L0 (nom: one source)
h	T plate height		60		60	nominal	L0 (nom: one source)
sl	Stem left edge ordinate		20		20	nominal	L0 (nom: one source)
sr	Stem right edge ordinate		40		40	nominal	L0 (nom: one source)
o2	Second hole ordinate		30		30	nominal	L0 (nom: one source)
o3	Third hole ordinate		50		50	nominal	L0 (nom: one source)
q2	Upper hole ordinate		30		30	nominal	L0 (nom: one source)
q3	Top hole ordinate		50		50	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-JOINPLATE-SZ-vs-t-5.pdf.

The vs-t-5 extrusion joining plate beside the vs-l-5 and the b8-inline-2

The vs-t-5 is number 9 of the 21 Extrusion joining plate extrusion joining plates published here, listed from b6-inline-2 to s45-inline-4.

• Length (l): 60 mm on the vs-t-5 extrusion joining plate, against 60 mm on the vs-l-5 and 55 mm on the b8-inline-2.
• Leg width (w): 20 mm on the vs-t-5 extrusion joining plate, against 20 mm on the vs-l-5 and 25 mm on the b8-inline-2.
• Thickness (t): 4 mm on the vs-t-5 extrusion joining plate, against 4 mm on the vs-l-5 and 3.2 mm on the b8-inline-2.
• Hole diameter (d): 5.1 mm on the vs-t-5 extrusion joining plate, against 5.1 mm on the vs-l-5 and 7 mm on the b8-inline-2.
• Number of holes (n): 5 on the vs-t-5 extrusion joining plate, against 5 on the vs-l-5 and 2 on the b8-inline-2.
• Hole spacing (p): 20 mm on the vs-t-5 extrusion joining plate, against 20 mm on the vs-l-5 and 30 mm on the b8-inline-2.
• Hole to outer edge (g): 10 mm on the vs-t-5 extrusion joining plate, the same on the vs-l-5.

Other sizes

• One size smaller: vs-l-5 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 60 mm long, 5 × 5.1 mm holes.
• One size larger: b8-inline-2 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 55 mm long, 2 × 7 mm holes.

Documents

• CC-JOINPLATE-DS-vs-t-5.pdf: vs-t-5 datasheet: values with levels, sources
• CC-JOINPLATE-SZ-vs-t-5.pdf: vs-t-5 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

ooznest-plate-pages, openbuilds-joining-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.