vs-strip-2 Extrusion Joining Plate (Joining Strip), Extrusion joining plate

2 holes of 5.1 mm through a plate 4 mm thick, 40 mm by 18 mm: the vs-strip-2 extrusion joining plate (Extrusion joining plate), as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: vs-strip-2 joining plate
• Model id: extrusion-joining-plates-vs-strip-2
• Standard: Extrusion joining plate · size vs-strip-2

Files

Part key	Simplified
extrusion-joining-plates-vs-strip-2	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Length		40		40	nominal	L0 (nom: one source)
w	Leg width		18		18	nominal	L0 (nom: one source)
t	Thickness		4		4	nominal	L0 (nom: one source)
d	Hole diameter		5.1		5.1	nominal	L0 (nom: one source)
n	Number of holes		2		2	nominal	L0 (nom: one source)
e	Hole to end		10		10	nominal	L0 (nom: one source)
g	Hole to outer edge		9		9	nominal	L0 (nom: one source)
o2	Second hole ordinate		30		30	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-JOINPLATE-SZ-vs-strip-2.pdf.

The vs-strip-2 extrusion joining plate beside the b6-t-4 and the vs-strip-3

The vs-strip-2 is number 6 of the 21 Extrusion joining plate extrusion joining plates published here, listed from b6-inline-2 to s45-inline-4.

• Length (l): 40 mm on the vs-strip-2 extrusion joining plate, against 100 mm on the b6-t-4 and 60 mm on the vs-strip-3.
• Leg width (w): 18 mm on the vs-strip-2 extrusion joining plate, the same on the b6-t-4 and the vs-strip-3.
• Thickness (t): 4 mm on the vs-strip-2 extrusion joining plate, against 3.2 mm on the b6-t-4 and 4 mm on the vs-strip-3.
• Hole diameter (d): 5.1 mm on the vs-strip-2 extrusion joining plate, against 5.5 mm on the b6-t-4 and 5.1 mm on the vs-strip-3.
• Number of holes (n): 2 on the vs-strip-2 extrusion joining plate, against 4 on the b6-t-4 and 3 on the vs-strip-3.
• Hole to end (e): 10 mm on the vs-strip-2 extrusion joining plate, the same on the b6-t-4 and the vs-strip-3.
• Hole to outer edge (g): 9 mm on the vs-strip-2 extrusion joining plate, the same on the b6-t-4 and the vs-strip-3.
• Second hole ordinate (o2): 30 mm on the vs-strip-2 extrusion joining plate, the same on the vs-strip-3.

Other sizes

• One size smaller: b6-t-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 100 mm long, 4 × 5.5 mm holes.
• One size larger: vs-strip-3 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 60 mm long, 3 × 5.1 mm holes.

Documents

• CC-JOINPLATE-DS-vs-strip-2.pdf: vs-strip-2 datasheet: values with levels, sources
• CC-JOINPLATE-SZ-vs-strip-2.pdf: vs-strip-2 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

openbuilds-joining-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.