s45-inline-2 Extrusion Joining Plate (Joining Strip), Extrusion joining plate

2 holes of 9 mm through a plate 3.2 mm thick, 80 mm by 40 mm: the s45-inline-2 extrusion joining plate (Extrusion joining plate), as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: s45-inline-2 joining plate
• Model id: extrusion-joining-plates-s45-inline-2
• Standard: Extrusion joining plate · size s45-inline-2

Files

Part key	Simplified
extrusion-joining-plates-s45-inline-2	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Length		80		80	nominal	L0 (nom: one source)
w	Leg width		40		40	nominal	L0 (nom: one source)
t	Thickness		3.2		3.2	nominal	L0 (nom: one source)
d	Hole diameter		9		9	nominal	L0 (nom: one source)
n	Number of holes		2		2	nominal	L0 (nom: one source)
p	Hole spacing		45		45	nominal	L0 (nom: one source)
r	Corner radius		2		2	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-JOINPLATE-SZ-s45-inline-2.pdf.

The s45-inline-2 extrusion joining plate beside the s10-t-4 and the s45-inline-4

The s45-inline-2 is number 20 of the 21 Extrusion joining plate extrusion joining plates published here, listed from b6-inline-2 to s45-inline-4.

• Length (l): 80 mm on the s45-inline-2 extrusion joining plate, against 100 mm on the s10-t-4 and 170 mm on the s45-inline-4.
• Leg width (w): 40 mm on the s45-inline-2 extrusion joining plate, against 28 mm on the s10-t-4 and 40 mm on the s45-inline-4.
• Thickness (t): 3.2 mm on the s45-inline-2 extrusion joining plate, the same on the s10-t-4 and the s45-inline-4.
• Hole diameter (d): 9 mm on the s45-inline-2 extrusion joining plate, the same on the s10-t-4 and the s45-inline-4.
• Number of holes (n): 2 on the s45-inline-2 extrusion joining plate, against 4 on the s10-t-4 and 4 on the s45-inline-4.
• Hole spacing (p): 45 mm on the s45-inline-2 extrusion joining plate, the same on the s45-inline-4.
• Corner radius (r): 2 mm on the s45-inline-2 extrusion joining plate, the same on the s45-inline-4.

Other sizes

• One size smaller: s10-t-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 100 mm long, 4 × 9 mm holes.
• One size larger: s45-inline-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 170 mm long, 4 × 9 mm holes.

Documents

• CC-JOINPLATE-DS-s45-inline-2.pdf: s45-inline-2 datasheet: values with levels, sources
• CC-JOINPLATE-SZ-s45-inline-2.pdf: s45-inline-2 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.