s10-t-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate

The s10-t-4 extrusion joining plate (Extrusion joining plate) is 100 mm long, 28 mm wide and 3.2 mm thick, with 4 holes of 9 mm. Here in simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: s10-t-4 joining plate
• Model id: extrusion-joining-plates-s10-t-4
• Standard: Extrusion joining plate · size s10-t-4

Files

Part key	Simplified
extrusion-joining-plates-s10-t-4	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Length		100		100	nominal	L0 (nom: one source)
w	Leg width		28		28	nominal	L0 (nom: one source)
t	Thickness		3.2		3.2	nominal	L0 (nom: one source)
d	Hole diameter		9		9	nominal	L0 (nom: one source)
n	Number of holes		4		4	nominal	L0 (nom: one source)
e	Hole to end		10		10	nominal	L0 (nom: one source)
g	Hole to outer edge		14		14	nominal	L0 (nom: one source)
h	T plate height		90		90	nominal	L0 (nom: one source)
ws	Stem width		28		28	nominal	L0 (nom: one source)
ps	Stem hole spacing		30		30	nominal	L0 (nom: one source)
es	Stem hole to end		10		10	nominal	L0 (nom: one source)
c	Corner chamfer		5		5	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-JOINPLATE-SZ-s10-t-4.pdf.

The s10-t-4 extrusion joining plate beside the s10-l-4 and the s45-inline-2

The s10-t-4 is number 19 of the 21 Extrusion joining plate extrusion joining plates published here, listed from b6-inline-2 to s45-inline-4.

• Length (l): 100 mm on the s10-t-4 extrusion joining plate, against 85 mm on the s10-l-4 and 80 mm on the s45-inline-2.
• Leg width (w): 28 mm on the s10-t-4 extrusion joining plate, against 28 mm on the s10-l-4 and 40 mm on the s45-inline-2.
• Thickness (t): 3.2 mm on the s10-t-4 extrusion joining plate, the same on the s10-l-4 and the s45-inline-2.
• Hole diameter (d): 9 mm on the s10-t-4 extrusion joining plate, the same on the s10-l-4 and the s45-inline-2.
• Number of holes (n): 4 on the s10-t-4 extrusion joining plate, against 4 on the s10-l-4 and 2 on the s45-inline-2.
• Hole to end (e): 10 mm on the s10-t-4 extrusion joining plate, the same on the s10-l-4.
• Hole to outer edge (g): 14 mm on the s10-t-4 extrusion joining plate, the same on the s10-l-4.

Other sizes

• One size smaller: s10-l-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 85 mm long, 4 × 9 mm holes.
• One size larger: s45-inline-2 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 80 mm long, 2 × 9 mm holes.

Documents

• CC-JOINPLATE-DS-s10-t-4.pdf: s10-t-4 datasheet: values with levels, sources
• CC-JOINPLATE-SZ-s10-t-4.pdf: s10-t-4 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.