s10-inline-4 Extrusion Joining Plate (Joining Strip), Extrusion joining plate

4 holes of 9 mm through a plate 3.2 mm thick, 155 mm by 35 mm: the s10-inline-4 extrusion joining plate (Extrusion joining plate), as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: s10-inline-4 joining plate
• Model id: extrusion-joining-plates-s10-inline-4
• Standard: Extrusion joining plate · size s10-inline-4

Files

Part key	Simplified
extrusion-joining-plates-s10-inline-4	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
l	Length		155		155	nominal	L0 (nom: one source)
w	Leg width		35		35	nominal	L0 (nom: one source)
t	Thickness		3.2		3.2	nominal	L0 (nom: one source)
d	Hole diameter		9		9	nominal	L0 (nom: one source)
n	Number of holes		4		4	nominal	L0 (nom: one source)
p	Hole spacing		40		40	nominal	L0 (nom: one source)
r	Corner radius		2		2	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-JOINPLATE-SZ-s10-inline-4.pdf.

The s10-inline-4 extrusion joining plate beside the s10-inline-2 and the s10-l-3

The s10-inline-4 is number 16 of the 21 Extrusion joining plate extrusion joining plates published here, listed from b6-inline-2 to s45-inline-4.

• Length (l): 155 mm on the s10-inline-4 extrusion joining plate, against 75 mm on the s10-inline-2 and 60 mm on the s10-l-3.
• Leg width (w): 35 mm on the s10-inline-4 extrusion joining plate, against 35 mm on the s10-inline-2 and 28 mm on the s10-l-3.
• Thickness (t): 3.2 mm on the s10-inline-4 extrusion joining plate, the same on the s10-inline-2 and the s10-l-3.
• Hole diameter (d): 9 mm on the s10-inline-4 extrusion joining plate, the same on the s10-inline-2 and the s10-l-3.
• Number of holes (n): 4 on the s10-inline-4 extrusion joining plate, against 2 on the s10-inline-2 and 3 on the s10-l-3.
• Hole spacing (p): 40 mm on the s10-inline-4 extrusion joining plate, against 40 mm on the s10-inline-2 and 36 mm on the s10-l-3.
• Corner radius (r): 2 mm on the s10-inline-4 extrusion joining plate, the same on the s10-inline-2.

Other sizes

• One size smaller: s10-inline-2 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 75 mm long, 2 × 9 mm holes.
• One size larger: s10-l-3 Extrusion Joining Plate (Joining Strip), Extrusion joining plate, 60 mm long, 3 × 9 mm holes.

Documents

• CC-JOINPLATE-DS-s10-inline-4.pdf: s10-inline-4 datasheet: values with levels, sources
• CC-JOINPLATE-SZ-s10-inline-4.pdf: s10-inline-4 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.