Slit Shaft Coupling, Misumi CPLCN20-6.35-8

STL Supports CommunityCAD0 downloads
Slit Shaft Coupling, Misumi CPLCN20-6.35-8
1 / 6

Slit Shaft Coupling, Misumi CPLCN20-6.35-8

The Misumi CPLCN20-6.35-8 shaft coupling: outside diameter 20 mm, overall length 26 mm, small bore 6.35 mm. Available as simplified STEP files.

Misumi CPLCN20-6.35-8 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Misumi's published drawing; Misumi did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Misumi CPLCN20-6.35-8 shaft coupler, Misumi CPLCN20-6.35-8 motor coupler, Misumi CPLCN20-6.35-8 beam coupling, Misumi CPLCN20-6.35-8 flexible coupling, Misumi CPLCN20-6.35-8 rigid coupling
  • Model id: shaft-couplers-misumi-cplcn20-6p35-8
  • Standard: Shaft coupling · size Misumi CPLCN20-6.35-8

Files

Part keySimplified
shaft-couplers-misumi-cplcn20-6p35-8STEP

Dimensions

Dimension symbols for Misumi CPLCN20-6.35-8 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter2020nominalL2
LOverall length2626nominalL2
d1Small bore6.356.35nominalL2
d2Large bore88nominalL2
MClamp screw thread2.52.5nominalL2
nNumber of clamp screws44nominalL2
sClamp screw offset6.56.5nominalL2
FClamp screw position3.753.75nominalL2
lHub length7.57.5nominalL2

Drawing

Drawing of the Misumi CPLCN20-6.35-8 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-misumi-cplcn20-6p35-8.pdf.

The Misumi CPLCN20-6.35-8 shaft coupling beside the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8

The Misumi CPLCN20-6.35-8 is number 8 of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 20 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Overall length (L): 26 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Small bore (d1): 6.35 mm on the Misumi CPLCN20-6.35-8 shaft coupling, against 5 mm on the Misumi CPLCN20-5-8 and 8 mm on the Misumi CPLCN20-8-8.
  • Large bore (d2): 8 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Clamp screw thread (M): 2.5 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Number of clamp screws (n): 4 on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Clamp screw offset (s): 6.5 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.
  • Clamp screw position (F): 3.75 mm on the Misumi CPLCN20-6.35-8 shaft coupling, the same on the Misumi CPLCN20-5-8 and the Misumi CPLCN20-8-8.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

misumi-couplings-slit-rigid. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...