Slit Shaft Coupling, Misumi CPLCN16-5-5

STL Supports CommunityCAD0 downloads
Slit Shaft Coupling, Misumi CPLCN16-5-5
1 / 6

Slit Shaft Coupling, Misumi CPLCN16-5-5

The Misumi CPLCN16-5-5 shaft coupling: outside diameter 16 mm, overall length 23 mm, small bore 5 mm. Available as simplified STEP files.

Misumi CPLCN16-5-5 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Misumi's published drawing; Misumi did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Misumi CPLCN16-5-5 shaft coupler, Misumi CPLCN16-5-5 motor coupler, Misumi CPLCN16-5-5 beam coupling, Misumi CPLCN16-5-5 flexible coupling, Misumi CPLCN16-5-5 rigid coupling
  • Model id: shaft-couplers-misumi-cplcn16-5-5
  • Standard: Shaft coupling · size Misumi CPLCN16-5-5

Files

Part keySimplified
shaft-couplers-misumi-cplcn16-5-5STEP

Dimensions

Dimension symbols for Misumi CPLCN16-5-5 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter1616nominalL2
LOverall length2323nominalL2
d1Small bore55nominalL2
d2Large bore55nominalL2
MClamp screw thread2.52.5nominalL2
nNumber of clamp screws44nominalL2
sClamp screw offset55nominalL2
FClamp screw position3.253.25nominalL2
lHub length6.56.5nominalL2

Drawing

Drawing of the Misumi CPLCN16-5-5 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-misumi-cplcn16-5-5.pdf.

The Misumi CPLCN16-5-5 shaft coupling beside the Ruland PCMR22-8-8 and the Misumi CPLCN20-5-8

The Misumi CPLCN16-5-5 is number 6 of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 16 mm on the Misumi CPLCN16-5-5 shaft coupling, against 22.2 mm on the Ruland PCMR22-8-8 and 20 mm on the Misumi CPLCN20-5-8.
  • Overall length (L): 23 mm on the Misumi CPLCN16-5-5 shaft coupling, against 27 mm on the Ruland PCMR22-8-8 and 26 mm on the Misumi CPLCN20-5-8.
  • Small bore (d1): 5 mm on the Misumi CPLCN16-5-5 shaft coupling, against 8 mm on the Ruland PCMR22-8-8 and 5 mm on the Misumi CPLCN20-5-8.
  • Large bore (d2): 5 mm on the Misumi CPLCN16-5-5 shaft coupling, against 8 mm on the Ruland PCMR22-8-8 and 8 mm on the Misumi CPLCN20-5-8.
  • Clamp screw thread (M): 2.5 mm on the Misumi CPLCN16-5-5 shaft coupling, against 3 mm on the Ruland PCMR22-8-8 and 2.5 mm on the Misumi CPLCN20-5-8.
  • Number of clamp screws (n): 4 on the Misumi CPLCN16-5-5 shaft coupling, the same on the Misumi CPLCN20-5-8.
  • Clamp screw offset (s): 5 mm on the Misumi CPLCN16-5-5 shaft coupling, against 6.5 mm on the Misumi CPLCN20-5-8.
  • Clamp screw position (F): 3.25 mm on the Misumi CPLCN16-5-5 shaft coupling, against 3.75 mm on the Misumi CPLCN20-5-8.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

misumi-couplings-slit-rigid. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...