Rigid Clamp Shaft Coupling, Misumi CPRC16-5-5

STL Supports CommunityCAD0 downloads
Rigid Clamp Shaft Coupling, Misumi CPRC16-5-5
1 / 6

Rigid Clamp Shaft Coupling, Misumi CPRC16-5-5

The Misumi CPRC16-5-5 shaft coupling: outside diameter 16 mm, overall length 16 mm, small bore 5 mm. Available as simplified STEP files.

Misumi CPRC16-5-5 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Misumi's published drawing; Misumi did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Misumi CPRC16-5-5 shaft coupler, Misumi CPRC16-5-5 motor coupler, Misumi CPRC16-5-5 beam coupling, Misumi CPRC16-5-5 flexible coupling, Misumi CPRC16-5-5 rigid coupling
  • Model id: shaft-couplers-misumi-cprc16-5-5
  • Standard: Shaft coupling · size Misumi CPRC16-5-5

Files

Part keySimplified
shaft-couplers-misumi-cprc16-5-5STEP

Dimensions

Dimension symbols for Misumi CPRC16-5-5 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter1616nominalL2
LOverall length1616nominalL2
d1Small bore55nominalL2
d2Large bore55nominalL2
MClamp screw thread2.52.5nominalL2
nNumber of clamp screws22nominalL2
sClamp screw offset55nominalL2
FClamp screw position3.753.75nominalL2
tClamp slit width11nominalL2

Drawing

Drawing of the Misumi CPRC16-5-5 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-misumi-cprc16-5-5.pdf.

The Misumi CPRC16-5-5 shaft coupling beside the Misumi CPLCN20-8-8 and the Misumi CPRC20-8-8

The Misumi CPRC16-5-5 is number 10 of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 16 mm on the Misumi CPRC16-5-5 shaft coupling, against 20 mm on the Misumi CPLCN20-8-8 and 20 mm on the Misumi CPRC20-8-8.
  • Overall length (L): 16 mm on the Misumi CPRC16-5-5 shaft coupling, against 26 mm on the Misumi CPLCN20-8-8 and 20 mm on the Misumi CPRC20-8-8.
  • Small bore (d1): 5 mm on the Misumi CPRC16-5-5 shaft coupling, against 8 mm on the Misumi CPLCN20-8-8 and 8 mm on the Misumi CPRC20-8-8.
  • Large bore (d2): 5 mm on the Misumi CPRC16-5-5 shaft coupling, against 8 mm on the Misumi CPLCN20-8-8 and 8 mm on the Misumi CPRC20-8-8.
  • Clamp screw thread (M): 2.5 mm on the Misumi CPRC16-5-5 shaft coupling, the same on the Misumi CPLCN20-8-8 and the Misumi CPRC20-8-8.
  • Number of clamp screws (n): 2 on the Misumi CPRC16-5-5 shaft coupling, against 4 on the Misumi CPLCN20-8-8 and 2 on the Misumi CPRC20-8-8.
  • Clamp screw offset (s): 5 mm on the Misumi CPRC16-5-5 shaft coupling, against 6.5 mm on the Misumi CPLCN20-8-8 and 6.5 mm on the Misumi CPRC20-8-8.
  • Clamp screw position (F): 3.75 mm on the Misumi CPRC16-5-5 shaft coupling, against 3.75 mm on the Misumi CPLCN20-8-8 and 4.75 mm on the Misumi CPRC20-8-8.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

misumi-couplings-slit-rigid. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...