Rigid Clamp Shaft Coupling, Misumi CPRC20-8-8

STL Supports CommunityCAD0 downloads
Rigid Clamp Shaft Coupling, Misumi CPRC20-8-8
1 / 6

Rigid Clamp Shaft Coupling, Misumi CPRC20-8-8

The Misumi CPRC20-8-8 shaft coupling: outside diameter 20 mm, overall length 20 mm, small bore 8 mm. Available as simplified STEP files.

Misumi CPRC20-8-8 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Misumi's published drawing; Misumi did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Misumi CPRC20-8-8 shaft coupler, Misumi CPRC20-8-8 motor coupler, Misumi CPRC20-8-8 beam coupling, Misumi CPRC20-8-8 flexible coupling, Misumi CPRC20-8-8 rigid coupling
  • Model id: shaft-couplers-misumi-cprc20-8-8
  • Standard: Shaft coupling · size Misumi CPRC20-8-8

Files

Part keySimplified
shaft-couplers-misumi-cprc20-8-8STEP

Dimensions

Dimension symbols for Misumi CPRC20-8-8 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter2020nominalL2
LOverall length2020nominalL2
d1Small bore88nominalL2
d2Large bore88nominalL2
MClamp screw thread2.52.5nominalL2
nNumber of clamp screws22nominalL2
sClamp screw offset6.56.5nominalL2
FClamp screw position4.754.75nominalL2
tClamp slit width11nominalL2

Drawing

Drawing of the Misumi CPRC20-8-8 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-misumi-cprc20-8-8.pdf.

The Misumi CPRC20-8-8 shaft coupling beside the Misumi CPRC16-5-5

The Misumi CPRC20-8-8 is the last of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 20 mm on the Misumi CPRC20-8-8 shaft coupling, against 16 mm on the Misumi CPRC16-5-5.
  • Overall length (L): 20 mm on the Misumi CPRC20-8-8 shaft coupling, against 16 mm on the Misumi CPRC16-5-5.
  • Small bore (d1): 8 mm on the Misumi CPRC20-8-8 shaft coupling, against 5 mm on the Misumi CPRC16-5-5.
  • Large bore (d2): 8 mm on the Misumi CPRC20-8-8 shaft coupling, against 5 mm on the Misumi CPRC16-5-5.
  • Clamp screw thread (M): 2.5 mm on the Misumi CPRC20-8-8 shaft coupling, the same on the Misumi CPRC16-5-5.
  • Number of clamp screws (n): 2 on the Misumi CPRC20-8-8 shaft coupling, the same on the Misumi CPRC16-5-5.
  • Clamp screw offset (s): 6.5 mm on the Misumi CPRC20-8-8 shaft coupling, against 5 mm on the Misumi CPRC16-5-5.
  • Clamp screw position (F): 4.75 mm on the Misumi CPRC20-8-8 shaft coupling, against 3.75 mm on the Misumi CPRC16-5-5.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

misumi-couplings-slit-rigid. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...