ISO 10642 hexagon socket countersunk head screw, M8
Size drawing - M8 values on the views - | = 25 shown - enlarged 2:1
Thread pitch ra
< 17.92
View from above dk theo Head diameter, theoretical (sharp)
dk theo < 17.92
dk = 15.24 , 15.24 15.24-16.43 Head diameter, actual (land)
k = 4.96
4.366-4.96 =2. s = 5.08 Head height “oS ; ; 5.02-5.14 4.366-4.96 \ Head angle, deg 90 90-92 5.08 Socket across flats
| = 25 shown 5.02-5.14 lengths 16-80
15.24-16.43
2 5.723 Socket across corners
r20.4
2.9c 2.9-3.2
Socket depth
= 50° (ISO 4753 CH)
> Underhead fillet radius 2 0.4
7.89 7.78-8.00
di = 6.6468 Shank diameter
28 ref Thread length
Basic minor diameter (end face) 6.6468
tap Tap drill (method d - P) 6.78
< 50 a end End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1- L113 - LO 4.
Notes
dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source. s: the nominal is the key size; the socket is modeled at the middle of its band.
TITLE
'? CommunityCAD Size drawing, M8
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Countersunk socket screw - M8 SHEET REV SCALE PROJECTION UNITS CC-1S010642-SZ-M8 A 2:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE eb6c875b0758ced249F7398440847c26413da3e0 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
