mSATA card envelope, full size
Size drawing - full size values on the views - enlarged 2:1
Sym. Dimensio!
kc = 4.20* Card length 50.80 50.65-50.95
Card width BE
L ht < 1.35* 29.70-30.00 I hb = 1.25* 1.00%
PCB thickness 0.90-1.10
25.70* 25.55-25.85
Edge connector tongue width
Tongue length 3.33%
dh = 2.60*, kox = 5.80*, koy = 5.80* r Shoulder radius 1.00% dh 2.50-2.70, kox 5.65-5.95, koy 5.65-5.95
xh = 48.05* 1.50%
Key notch width
1.40-1.60
Is = 3.33* 4.00%
3.90-4.10
Key notch depth from the contact edge
Key notch off the centreline 3.85*
Contact-free width round the key (min) 2 4.00*
2.60% 2.50-2.70
Mounting hole @ - W = 29.85 Wt = 25.70* Mounting hole spacing 24.20% ph = 24.20* 29.70-30.00 25.55-25.85
Mounting holes from the contact edge
Component keep-out from the contact edge (min)
Component keep-out from the long edges (min) 2 0.50%
5.80% 5.65-5.95
Hold-down keep-out, along the card
. * L = 50.80 Hold-down keep-out, across the card 5.80 50.65-50.95 5.65-5.95
dk = 4.00* Primary-side component height (max) $ 1.35* 3.90-4.10
wk = 1.50*, gk = 4.00*
wk 1.40-1.60 Secondary-side component height (max)
Source levels
Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). qITke
L1 = two or more independent sources agree: the release gate. i Hi Hy i
LO = one source only: printed amber and marked *. O CommunityCAD Size drawing, full size
c = asource value was corrected; the datasheet says how. STANDARDS FOLLOWED FAMILY / DETAIL
House convention = a detail no source dimensions, drawn to a stated house rule. Makers' mSATA drawings (JEDEC MO-300 not free) MSATA card - full size
This size's values: L1 2 - LO 20. SHEET REV SCALE PROJECTION UNITS
Notes CC-MSATA-SZ-full-size A 2:1 Dimensions in mm
L and W: six makers' outlines and Micron's drawing (L1). Every other value is SPEC VERSION LICENSE PAGE Micron M510 Figure 4's text layer alone (LO, amber). xe (the far end to the holes) 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1 and the makers' Hp are recorded, not modeled (ADR 0143 row 4, #1428 item 3).
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
