40x40 B-type slot 6 Extrusion End Cap

STEP · STL Supports CommunityCAD0 downloads
40x40 B-type slot 6 Extrusion End Cap
1 / 6

40x40 B-type slot 6 Extrusion End Cap

40 mm by 40 mm over its face, 3 mm thick at the seat and 1 mm corners: the 40x40 B-type slot 6 extrusion end cap, as simplified STEP files.

40x40 B-type slot 6 extrusion end cap, Extrusion end cap

How these parts are made, and what the levels mean: read the method

  • Also known as: 40x40 B-type slot 6 profile end cap, 40x40 B-type slot 6 T-slot end cover, 40x40 B-type slot 6 aluminium extrusion end plate
  • Model id: extrusion-end-caps-b6-40x40
  • Standard: Extrusion end cap · size 40x40 B-type slot 6

Files

Part keySimplified
extrusion-end-caps-b6-40x40STEP

Dimensions

Dimension symbols for 40x40 B-type slot 6 extrusion end caps (Extrusion end cap)

SymbolNameminnommaxModeledRuleLevel
aCap width4040nominalL0 (nom: one source)
hCap height4040nominalL0 (nom: one source)
tSeat thickness33nominalL0 (nom: one source)
rCorner radius11nominalL0 (nom: one source)

Drawing

Drawing of the 40x40 B-type slot 6 extrusion end cap with its values (Extrusion end cap)

As a PDF: CC-ENDCAP-SZ-b6-40x40.pdf.

The 40x40 B-type slot 6 extrusion end cap beside the 20x60 B-type slot 6 and the 30x30 B-type slot 8

The 40x40 B-type slot 6 is number 4 of the 16 Extrusion end caps published here, listed from 20x20 B-type slot 6 to 90x90 slot 10.

  • Cap width (a): 40 mm on the 40x40 B-type slot 6 extrusion end cap, against 20 mm on the 20x60 B-type slot 6 and 30 mm on the 30x30 B-type slot 8.
  • Cap height (h): 40 mm on the 40x40 B-type slot 6 extrusion end cap, against 60 mm on the 20x60 B-type slot 6 and 30 mm on the 30x30 B-type slot 8.
  • Seat thickness (t): 3 mm on the 40x40 B-type slot 6 extrusion end cap, the same on the 20x60 B-type slot 6 and the 30x30 B-type slot 8.
  • Corner radius (r): 1 mm on the 40x40 B-type slot 6 extrusion end cap, against 1 mm on the 20x60 B-type slot 6 and 2 mm on the 30x30 B-type slot 8.

Other sizes

Conventions

  • Simplified only: one solid, plate and plugs. STEP AP214, millimetres, the back face (on the profile's end) at Z = 0, the outer face at Z = t, the plugs toward -Z, the outline centred on the origin.
  • The cross plugs on the back, the face's edge round and the recessed CommunityCAD mark are illustrative, not any maker's design; the plugs are sized to the profile's core bore and measured only for fit.

Documents

Sources

misumi-end-caps. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ENDCAP-SZ-b6-40x40.pdf

Extrusion end cap, per profile cross-section, b6-40x40 Size drawing - b6-40x40 values on the views - enlarged 3:1 Sym. Dimensi Cap width Cap height Seat thickness Corner radius Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max,…

View full datasheet →

docs/CC-ENDCAP-DS-b6-40x40.pdf

CC-ENDCAP-DS-b6-40x40 revA Size datasheet - b6-40x40 '?) CommunityCAD 40x40 B-type slot 6 extrusion end cap Size datasheet: this size's values with their levels, conventions and sources. For 40x40 B-type slot 6 aluminium extrusion ends —T 1 Part key extrusion-end-caps-b6-40x40 Files 1 STEP AP214…

View full datasheet →