5x1.5x1 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
5x1.5x1 Block Magnet, Neodymium
1 / 5

5x1.5x1 Block Magnet, Neodymium

The 5x1.5x1 block magnet (Neodymium block magnet) is 5 mm long, 1.5 mm wide and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

5x1.5x1 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 5x1.5x1 bar magnet, 5x1.5x1 rectangular magnet, 5x1.5x1 rare earth magnet, 5x1.5x1 neodymium magnet
  • Model id: magnets-block-5x1-5x1
  • Standard: Neodymium block magnet · size 5x1.5x1

Files

Part keySimplified
magnets-block-5x1-5x1STEP

Dimensions

Dimension symbols for 5x1.5x1 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength55nominalL1
WWidth1.51.5nominalL1
HHeight11nominalL1

Drawing

Drawing of the 5x1.5x1 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-5x1.5x1.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N45.
  • The shape is the same in any grade.

The 5x1.5x1 block magnet beside the 5x2.5x1.5

The 5x1.5x1 is the first of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 5 mm on the 5x1.5x1 block magnet, the same on the 5x2.5x1.5.
  • Width (W): 1.5 mm on the 5x1.5x1 block magnet, against 2.5 mm on the 5x2.5x1.5.
  • Height (H): 1 mm on the 5x1.5x1 block magnet, against 1.5 mm on the 5x2.5x1.5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-SZ-5x1.5x1.pdf

Neodymium block magnet, length x width x height, 5x1.5x1 Size drawing - 5x1.5x1 values on the views - enlarged 8:1 Dimension 5x1.5x1 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under…

View full datasheet →

docs/CC-MAGBLOCK-DS-5x1.5x1.pdf

* CC-MAGBLOCK-DS-5x1.5x1 revA '?) CommunityCAD Size datasheet - 5x1.5x1 5 x 1.5 x 1mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade | Part key magnets-block-5x1-5x1 Files 1 STEP…

View full datasheet →