46x30x10 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
46x30x10 Block Magnet, Neodymium
1 / 5

46x30x10 Block Magnet, Neodymium

The 46x30x10 block magnet (Neodymium block magnet) is 46 mm long, 30 mm wide and 10 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

46x30x10 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 46x30x10 bar magnet, 46x30x10 rectangular magnet, 46x30x10 rare earth magnet, 46x30x10 neodymium magnet
  • Model id: magnets-block-46x30x10
  • Standard: Neodymium block magnet · size 46x30x10

Files

Part keySimplified
magnets-block-46x30x10STEP

Dimensions

Dimension symbols for 46x30x10 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength4646nominalL1
WWidth3030nominalL1
HHeight1010nominalL1

Drawing

Drawing of the 46x30x10 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-46x30x10.pdf.

What each maker states

  • supermagnete lists this size in N40.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 46x30x10 block magnet beside the 40x20x10

The 46x30x10 is the last of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 46 mm on the 46x30x10 block magnet, against 40 mm on the 40x20x10.
  • Width (W): 30 mm on the 46x30x10 block magnet, against 20 mm on the 40x20x10.
  • Height (H): 10 mm on the 46x30x10 block magnet, the same on the 40x20x10.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-SZ-46x30x10.pdf

Neodymium block magnet, length x width x height, 46x30x10 Size drawing - 46x30x10 values on the views - enlarged 3:1 Dimension 46x30x10 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →

docs/CC-MAGBLOCK-DS-46x30x10.pdf

* CC-MAGBLOCK-DS-46x30x10 rev A '?) CommunityCAD Size datasheet - 46x30x10 46 x 30 x 10 mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade | Part key magnets-block-46x30x10 Files 1…

View full datasheet →