30x10 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
30x10 Disc Magnet, Neodymium
1 / 5

30x10 Disc Magnet, Neodymium

The 30x10 disc magnet (Neodymium disc magnet) is 30 mm across and 10 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

30x10 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 30x10 round magnet, 30x10 rare earth magnet, 30x10 button magnet, 30x10 neodymium magnet
  • Model id: magnets-disc-30x10
  • Standard: Neodymium disc magnet · size 30x10

Files

Part keySimplified
magnets-disc-30x10STEP

Dimensions

Dimension symbols for 30x10 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter3030nominalL1
HHeight1010nominalL1

Drawing

Drawing of the 30x10 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-30x10.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N52.
  • The shape is the same in any grade.

The 30x10 disc magnet beside the 25x5

The 30x10 is the last of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 30 mm on the 30x10 disc magnet, against 25 mm on the 25x5.
  • Height (H): 10 mm on the 30x10 disc magnet, against 5 mm on the 25x5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-SZ-30x10.pdf

Neodymium disc magnet, diameter x height, 30x10 Size drawing - 30x10 values on the views - enlarged 5:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < /…

View full datasheet →

docs/CC-MAGDISC-DS-30x10.pdf

* CC-MAGDISC-DS-30x10 revA '?) CommunityCAD Size datasheet - 30x10 30 x 10 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade LC Part key magnets-disc-30x10 Files 1 STEP AP214…

View full datasheet →