40x20x5 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
40x20x5 Block Magnet, Neodymium
1 / 5

40x20x5 Block Magnet, Neodymium

The 40x20x5 block magnet (Neodymium block magnet) is 40 mm long, 20 mm wide and 5 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

40x20x5 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 40x20x5 bar magnet, 40x20x5 rectangular magnet, 40x20x5 rare earth magnet, 40x20x5 neodymium magnet
  • Model id: magnets-block-40x20x5
  • Standard: Neodymium block magnet · size 40x20x5

Files

Part keySimplified
magnets-block-40x20x5STEP

Dimensions

Dimension symbols for 40x20x5 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength4040nominalL1
WWidth2020nominalL1
HHeight55nominalL1

Drawing

Drawing of the 40x20x5 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-40x20x5.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N52.
  • The shape is the same in any grade.

The 40x20x5 block magnet beside the 40x10x5 and the 40x20x10

The 40x20x5 is number 19 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 40 mm on the 40x20x5 block magnet, the same on the 40x10x5 and the 40x20x10.
  • Width (W): 20 mm on the 40x20x5 block magnet, against 10 mm on the 40x10x5 and 20 mm on the 40x20x10.
  • Height (H): 5 mm on the 40x20x5 block magnet, against 5 mm on the 40x10x5 and 10 mm on the 40x20x10.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-DS-40x20x5.pdf

* CC-MAGBLOCK-DS-40x20x5 rev A '?) CommunityCAD Size datasheet - 40x20x5 40 x 20 x 5 mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade C.ts—‘Czd Part key magnets-block-40x20x5 Files 1…

View full datasheet →

docs/CC-MAGBLOCK-SZ-40x20x5.pdf

Neodymium block magnet, length x width x height, 40x20x5 Size drawing - 40x20x5 values on the views - enlarged 5:1 Dimension 40x20x5 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under…

View full datasheet →