5 mm Clevis Pin (Headed Pin), Form A, ISO 2341

All 16 lengths from 10 to 50 mm, each as simplified STEP: one 5 mm clevis pin (ISO 2341, form A) with a head 8 mm across and 1.6 mm high.

How these parts are made, and what the levels mean: read the method

• Also searched as: 5 mm pin, 5 mm x 10 to 5 mm x 50 pins
• Model id: iso2341-a-d5
• Standard: ISO 2341:1986 · size 5 mm

Lengths

Length (mm)	Part key	Simplified
10	iso2341-a-d5x10	STEP
12	iso2341-a-d5x12	STEP
14	iso2341-a-d5x14	STEP
16	iso2341-a-d5x16	STEP
18	iso2341-a-d5x18	STEP
20	iso2341-a-d5x20	STEP
22	iso2341-a-d5x22	STEP
24	iso2341-a-d5x24	STEP
26	iso2341-a-d5x26	STEP
28	iso2341-a-d5x28	STEP
30	iso2341-a-d5x30	STEP
32	iso2341-a-d5x32	STEP
35	iso2341-a-d5x35	STEP
40	iso2341-a-d5x40	STEP
45	iso2341-a-d5x45	STEP
50	iso2341-a-d5x50	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Shank diameter, nominal		5		5	nominal	L1
dk	Head diameter, nominal		8		8	nominal	L1
k	Head height, nominal		1.6		1.6	nominal	L1
c	End chamfer length			2	2	single limit (max), modeled at the limit	L1
e	Head chamfer length		1 ref		1	reference value	L1
r	Underhead radius		0.6		0.6	nominal	L1
c_angle	End chamfer angle		30 ref		30	reference value	L0 (ref: one source)
e_angle	Head chamfer angle		45 ref		45	reference value	L0 (ref: one source)

Drawing

As a PDF: CC-ISO2341-SZ-5.pdf.

The 5 mm form A clevis pin beside the 4 mm and the 6 mm

The 5 mm is number 3, counting from the smallest, of the 5 ISO 2341 clevis pins published here, from 3 mm to 8 mm.

• Shank diameter, nominal (d): 5 mm on the 5 mm form A clevis pin, against 4 mm on the 4 mm and 6 mm on the 6 mm.
• Head diameter, nominal (dk): 8 mm on the 5 mm form A clevis pin, against 6 mm on the 4 mm and 10 mm on the 6 mm.
• Head height, nominal (k): 1.6 mm on the 5 mm form A clevis pin, against 1 mm on the 4 mm and 2 mm on the 6 mm.
• End chamfer length (c): up to 2 mm on the 5 mm form A clevis pin, against up to 1 mm on the 4 mm and up to 2 mm on the 6 mm.
• Head chamfer length (e): 1 mm (reference) on the 5 mm form A clevis pin, against 0.5 mm (reference) on the 4 mm and 1 mm (reference) on the 6 mm.
• Underhead radius (r): 0.6 mm on the 5 mm form A clevis pin, the same on the 4 mm and the 6 mm.
• End chamfer angle (c_angle): 30° (reference) on the 5 mm form A clevis pin, the same on the 4 mm and the 6 mm.
• Head chamfer angle (e_angle): 45° (reference) on the 5 mm form A clevis pin, the same on the 4 mm and the 6 mm.

The 5 mm form A clevis pin in its other forms

• 5 mm Clevis Pin (Headed Pin), Form B, ISO 2341: split-pin hole diameter, nominal 1.2 mm, hole to end distance at least 2.9 mm.

Other sizes

• One size smaller: 4 mm Clevis Pin (Headed Pin), Form A, ISO 2341, 6 mm head.
• One size larger: 6 mm Clevis Pin (Headed Pin), Form A, ISO 2341, 10 mm head.

Documents

• CC-ISO2341-DS-5.pdf: 5 datasheet: values with levels, lengths, sources
• CC-ISO2341-SZ-5.pdf: 5 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

amesweb-iso2341, amesweb-iso2341-figure, boltport-iso2341, fasten-it-din-en-22341, fasteners-eu-iso2341. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.