6 mm Clevis Pin (Headed Pin), Form A, ISO 2341

A 6 mm clevis pin (ISO 2341, form A) with a head 10 mm across and 2 mm high. Here in 17 lengths from 12 to 60 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 6 mm pin, 6 mm x 12 to 6 mm x 60 pins
• Model id: iso2341-a-d6
• Standard: ISO 2341:1986 · size 6 mm

Lengths

Length (mm)	Part key	Simplified
12	iso2341-a-d6x12	STEP
14	iso2341-a-d6x14	STEP
16	iso2341-a-d6x16	STEP
18	iso2341-a-d6x18	STEP
20	iso2341-a-d6x20	STEP
22	iso2341-a-d6x22	STEP
24	iso2341-a-d6x24	STEP
26	iso2341-a-d6x26	STEP
28	iso2341-a-d6x28	STEP
30	iso2341-a-d6x30	STEP
32	iso2341-a-d6x32	STEP
35	iso2341-a-d6x35	STEP
40	iso2341-a-d6x40	STEP
45	iso2341-a-d6x45	STEP
50	iso2341-a-d6x50	STEP
55	iso2341-a-d6x55	STEP
60	iso2341-a-d6x60	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Shank diameter, nominal		6		6	nominal	L1
dk	Head diameter, nominal		10		10	nominal	L1
k	Head height, nominal		2		2	nominal	L1
c	End chamfer length			2	2	single limit (max), modeled at the limit	L1
e	Head chamfer length		1 ref		1	reference value	L1
r	Underhead radius		0.6		0.6	nominal	L1
c_angle	End chamfer angle		30 ref		30	reference value	L0 (ref: one source)
e_angle	Head chamfer angle		45 ref		45	reference value	L0 (ref: one source)

Drawing

As a PDF: CC-ISO2341-SZ-6.pdf.

The 6 mm form A clevis pin beside the 5 mm and the 8 mm

The 6 mm is number 4, counting from the smallest, of the 5 ISO 2341 clevis pins published here, from 3 mm to 8 mm.

• Shank diameter, nominal (d): 6 mm on the 6 mm form A clevis pin, against 5 mm on the 5 mm and 8 mm on the 8 mm.
• Head diameter, nominal (dk): 10 mm on the 6 mm form A clevis pin, against 8 mm on the 5 mm and 14 mm on the 8 mm.
• Head height, nominal (k): 2 mm on the 6 mm form A clevis pin, against 1.6 mm on the 5 mm and 3 mm on the 8 mm.
• End chamfer length (c): up to 2 mm on the 6 mm form A clevis pin, the same on the 5 mm and the 8 mm.
• Head chamfer length (e): 1 mm (reference) on the 6 mm form A clevis pin, the same on the 5 mm and the 8 mm.
• Underhead radius (r): 0.6 mm on the 6 mm form A clevis pin, the same on the 5 mm and the 8 mm.
• End chamfer angle (c_angle): 30° (reference) on the 6 mm form A clevis pin, the same on the 5 mm and the 8 mm.
• Head chamfer angle (e_angle): 45° (reference) on the 6 mm form A clevis pin, the same on the 5 mm and the 8 mm.

The 6 mm form A clevis pin in its other forms

• 6 mm Clevis Pin (Headed Pin), Form B, ISO 2341: split-pin hole diameter, nominal 1.6 mm, hole to end distance at least 3.2 mm.

Other sizes

• One size smaller: 5 mm Clevis Pin (Headed Pin), Form A, ISO 2341, 8 mm head.
• One size larger: 8 mm Clevis Pin (Headed Pin), Form A, ISO 2341, 14 mm head.

Documents

• CC-ISO2341-DS-6.pdf: 6 datasheet: values with levels, lengths, sources
• CC-ISO2341-SZ-6.pdf: 6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

amesweb-iso2341, amesweb-iso2341-figure, boltport-iso2341, fasten-it-din-en-22341, fasteners-eu-iso2341. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.