3 mm Clevis Pin (Headed Pin), Form A, ISO 2341

A 3 mm clevis pin (ISO 2341, form A) with a head 5 mm across and 1 mm high. Here in 13 lengths from 6 to 30 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 3 mm pin, 3 mm x 6 to 3 mm x 30 pins
• Model id: iso2341-a-d3
• Standard: ISO 2341:1986 · size 3 mm

Lengths

Length (mm)	Part key	Simplified
6	iso2341-a-d3x6	STEP
8	iso2341-a-d3x8	STEP
10	iso2341-a-d3x10	STEP
12	iso2341-a-d3x12	STEP
14	iso2341-a-d3x14	STEP
16	iso2341-a-d3x16	STEP
18	iso2341-a-d3x18	STEP
20	iso2341-a-d3x20	STEP
22	iso2341-a-d3x22	STEP
24	iso2341-a-d3x24	STEP
26	iso2341-a-d3x26	STEP
28	iso2341-a-d3x28	STEP
30	iso2341-a-d3x30	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Shank diameter, nominal		3		3	nominal	L1
dk	Head diameter, nominal		5		5	nominal	L1
k	Head height, nominal		1		1	nominal	L1
c	End chamfer length			1	1	single limit (max), modeled at the limit	L1
e	Head chamfer length		0.5 ref		0.5	reference value	L1
r	Underhead radius		0.6		0.6	nominal	L1
c_angle	End chamfer angle		30 ref		30	reference value	L0 (ref: one source)
e_angle	Head chamfer angle		45 ref		45	reference value	L0 (ref: one source)

Drawing

As a PDF: CC-ISO2341-SZ-3.pdf.

The 3 mm form A clevis pin beside the 4 mm

The 3 mm is the smallest of the 5 ISO 2341 clevis pins published here, from 3 mm to 8 mm.

• Shank diameter, nominal (d): 3 mm on the 3 mm form A clevis pin, against 4 mm on the 4 mm.
• Head diameter, nominal (dk): 5 mm on the 3 mm form A clevis pin, against 6 mm on the 4 mm.
• Head height, nominal (k): 1 mm on the 3 mm form A clevis pin, the same on the 4 mm.
• End chamfer length (c): up to 1 mm on the 3 mm form A clevis pin, the same on the 4 mm.
• Head chamfer length (e): 0.5 mm (reference) on the 3 mm form A clevis pin, the same on the 4 mm.
• Underhead radius (r): 0.6 mm on the 3 mm form A clevis pin, the same on the 4 mm.
• End chamfer angle (c_angle): 30° (reference) on the 3 mm form A clevis pin, the same on the 4 mm.
• Head chamfer angle (e_angle): 45° (reference) on the 3 mm form A clevis pin, the same on the 4 mm.

The 3 mm form A clevis pin in its other forms

• 3 mm Clevis Pin (Headed Pin), Form B, ISO 2341: split-pin hole diameter, nominal 0.8 mm, hole to end distance at least 1.6 mm.

Other sizes

• One size larger: 4 mm Clevis Pin (Headed Pin), Form A, ISO 2341, 6 mm head.

Documents

• CC-ISO2341-DS-3.pdf: 3 datasheet: values with levels, lengths, sources
• CC-ISO2341-SZ-3.pdf: 3 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

amesweb-iso2341, amesweb-iso2341-figure, boltport-iso2341, fasten-it-din-en-22341. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.