ISO 2341 clevis pin with head, types A and B, 05
Size drawing - @5 values on the views - | = 20 shown - enlarged 10:1
Sym. | Dimensio
e = 1ref, B = 45° ref* (head chamfer) Shank diameter (h11)
Head diameter (h14)
Head height (js14)
Head chamfer, axial length
Underhead fillet radius
End chamfer, axial length, max
Split-pin hole, type B (H13)
Hole axis to free end, type B, min
* Head chamfer angle from the axis, deg aS ref
30 refx
End chamfer angle from the axis, deg
End face diameter (d - 2 c tan a)
Head top face diameter (dk - 2 e tan B)
| = 20 shown
lengths 10-50 Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 2.
Notes
c at its max and le at its min (single limits); d, dk, k, d1 at their nominals.
a, B: drawn only; one owner entry from the ISO 2341 figure (#604), so amber. Type A is type B without the hole; both are built for every length.
TITLE
'? CommunityCAD Size drawing, 5 STANDARDS FOLLOWED FAMILY / DETAIL ISO 2341:1986 Clevis pin - types A, B- @5
SHEET REV SCALE PROJECTION UNITS
CC-1802341-SZ-5 A 10:1 € Dimensions in mm c <2, 0 = 30° ref* (end chamfer) ‘SPEC VERSION LICENSE PAGE
e€79bc69C722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.