20x20x10 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
20x20x10 Block Magnet, Neodymium
1 / 5

20x20x10 Block Magnet, Neodymium

20 mm long, 20 mm wide and 10 mm high, the 20x20x10 block magnet (Neodymium block magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

20x20x10 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 20x20x10 bar magnet, 20x20x10 rectangular magnet, 20x20x10 rare earth magnet, 20x20x10 neodymium magnet
  • Model id: magnets-block-20x20x10
  • Standard: Neodymium block magnet · size 20x20x10

Files

Part keySimplified
magnets-block-20x20x10STEP

Dimensions

Dimension symbols for 20x20x10 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength2020nominalL1
WWidth2020nominalL1
HHeight1010nominalL1

Drawing

Drawing of the 20x20x10 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-20x20x10.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 20x20x10 block magnet beside the 20x20x5 and the 30x10x5

The 20x20x10 is number 16 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 20 mm on the 20x20x10 block magnet, against 20 mm on the 20x20x5 and 30 mm on the 30x10x5.
  • Width (W): 20 mm on the 20x20x10 block magnet, against 20 mm on the 20x20x5 and 10 mm on the 30x10x5.
  • Height (H): 10 mm on the 20x20x10 block magnet, against 5 mm on the 20x20x5 and 5 mm on the 30x10x5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-DS-20x20x10.pdf

* CC-MAGBLOCK-DS-20x20x10 rev A '?) CommunityCAD Size datasheet - 20x20x10 20 x 20 x 10 mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-block-20x20x10 Files 1 STEP…

View full datasheet →

docs/CC-MAGBLOCK-SZ-20x20x10.pdf

Neodymium block magnet, length x width x height, 20x20x10 Size drawing - 20x20x10 values on the views - enlarged 6:1 Dimension 20x20x10 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →