40 slot 10 l-3 Extrusion Joining Plate datasheet (PDF)

Datasheet — 40 slot 10 l-3 Extrusion Joining Plate by Milo

Open the PDF
40 slot 10 l-3 Extrusion Joining PlateGet the CAD model40 slot 10 l-3 Extrusion Joining PlateCC-JOINPLATE-DS-s10-l-3.pdf

Text of this datasheet

CC-JOINPLATE-DS-s10-1-3 revA Size datasheet - s10-I-3

'?) CommunityCAD

AO slot 10 L plate, 3 holes (extrusion joining plate)

Size datasheet: this size's values with their levels, conventions and sources.

O For joining 40 slot 10 extrusions (NY Part key extrusion-joining-plates-s10-I-3 ———ee Files 1 STEP AP214 (simplified)

O O

$10-I-3, outer face, 0.5:1 s10-I-3, edge, 0.5:1 (hidden lines dashed)

Sym. Dimension Value Level 1 Length 60* Lo- 1

w Leg width 28x Lo: 1

t Thickness 3.2* Lo -1

d Hole diameter ox Lo -1

n Number of holes 3x Lo -1

p Hole spacing 36x lo- 1

e Hole to end 10* lo -1

ic Corner chamfer 5x Lo -1

Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

No published standard (makers' drawings) Page 1/2 Extrusion joining plate - s10-I-3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-JOINPLATE-DS-s10-1-3 revA Size datasheet - s10-I-3

'?) CommunityCAD

Conventions

« House mark: The CommunityCAD mark recessed 0.3 mm into the outer face on its largest hole-free square (an L or T plate's corner, an inline plate's middle), clear of every hole and edge by one plate thickness; illustrative.

« Edges: Radius r at an inline plate's four corners and the 45° chamfer c at the outside corners Misumi chamfers, as drawn; every other edge sharp, including the hole edges and the inside corners. No countersinks, no markings.

e Values: No published standard: every plate is its reference maker's own design (Misumi HPT for B-type slot 6 and 8 and slot 10, OpenBuilds for V-slot), placed as its drawing places it; single source (LO, amber) unless a second maker states the same value. Hole positions, width and hole size are checked against the profile.

e Material: Each plate in its reference part's material, render and metadata only: Misumi's chromate-plated steel, OpenBuilds' anodised aluminium.

Sources Source Publisher Retrieved sha256 misumi-sheet-metal-plates MISUMI 2026-10-29 b16155d57c00 (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-JOINPLATE-DS.

No published standard (makers' drawings) Page 2/2 Extrusion joining plate - s10-I-3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.