40 slot 10 inline-4 Extrusion Joining Plate

STEP · STL Supports CommunityCAD0 downloads
40 slot 10 inline-4 Extrusion Joining Plate
1 / 6

40 slot 10 inline-4 Extrusion Joining Plate

4 holes of 9 mm through a plate 3.2 mm thick, 155 mm by 35 mm: the 40 slot 10 inline-4 extrusion joining plate, as simplified STEP files.

40 slot 10 inline-4 extrusion joining plate, Extrusion joining plate

How these parts are made, and what the levels mean: read the method

  • Also known as: 40 slot 10 inline-4 joining strip, 40 slot 10 inline-4 corner plate, 40 slot 10 inline-4 T plate, 40 slot 10 inline-4 flat connector plate
  • Model id: extrusion-joining-plates-s10-inline-4
  • Standard: Extrusion joining plate · size 40 slot 10 inline-4

Files

Part keySimplified
extrusion-joining-plates-s10-inline-4STEP

Dimensions

Dimension symbols for 40 slot 10 inline-4 extrusion joining plates (Extrusion joining plate)

SymbolNameminnommaxModeledRuleLevel
lLength155155nominalL0 (nom: one source)
wLeg width3535nominalL0 (nom: one source)
tThickness3.23.2nominalL0 (nom: one source)
dHole diameter99nominalL0 (nom: one source)
nNumber of holes44nominalL0 (nom: one source)
pHole spacing4040nominalL0 (nom: one source)
rCorner radius22nominalL0 (nom: one source)

Drawing

Drawing of the 40 slot 10 inline-4 extrusion joining plate with its values (Extrusion joining plate)

As a PDF: CC-JOINPLATE-SZ-s10-inline-4.pdf.

The 40 slot 10 inline-4 extrusion joining plate beside the 40 slot 10 inline-2 and the 40 slot 10 l-3

The 40 slot 10 inline-4 is number 16 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.

  • Length (l): 155 mm on the 40 slot 10 inline-4 extrusion joining plate, against 75 mm on the 40 slot 10 inline-2 and 60 mm on the 40 slot 10 l-3.
  • Leg width (w): 35 mm on the 40 slot 10 inline-4 extrusion joining plate, against 35 mm on the 40 slot 10 inline-2 and 28 mm on the 40 slot 10 l-3.
  • Thickness (t): 3.2 mm on the 40 slot 10 inline-4 extrusion joining plate, the same on the 40 slot 10 inline-2 and the 40 slot 10 l-3.
  • Hole diameter (d): 9 mm on the 40 slot 10 inline-4 extrusion joining plate, the same on the 40 slot 10 inline-2 and the 40 slot 10 l-3.
  • Number of holes (n): 4 on the 40 slot 10 inline-4 extrusion joining plate, against 2 on the 40 slot 10 inline-2 and 3 on the 40 slot 10 l-3.
  • Hole spacing (p): 40 mm on the 40 slot 10 inline-4 extrusion joining plate, against 40 mm on the 40 slot 10 inline-2 and 36 mm on the 40 slot 10 l-3.
  • Corner radius (r): 2 mm on the 40 slot 10 inline-4 extrusion joining plate, the same on the 40 slot 10 inline-2.

Other sizes

Conventions

  • Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
  • The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.

Documents

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-JOINPLATE-SZ-s10-inline-4.pdf

Extrusion joining plate, inline, Land T, s10-inline-4 Size drawing - s10-inline-4 values on the views - scale 1:1 yd holes: n = 4* d = 9* Leg width Thickness Hole diameter Number of holes Hole spacing Corner radius Source levels Main value = the modeled value (nominal, else the middle of min-max).…

View full datasheet →

docs/CC-JOINPLATE-DS-s10-inline-4.pdf

CC-JOINPLATE-DS-s10-inline-4 revA Size datasheet - s10-inline-4 '?) CommunityCAD 4O slot 10 inline plate, 4 holes (extrusion joining plate) Size datasheet: this size's values with their levels, conventions and sources. ————_—_—_—____ For joining 40 slot 10 extrusions Part key…

View full datasheet →