18x25 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
18x25 Shim Washer, DIN 988
1 / 4

18x25 Shim Washer, DIN 988

Made for 18x25 screws, this shim washer (DIN 988) has an 18 mm hole and is 25 mm across. Download it as 6 lengths from 0.1 to 1.5 mm, each as simplified STEP.

18x25 × 1.5 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 18x25 shim ring, 18x25 precision shim, 18x25 Passscheibe, 18x25 x 0.1 to 18x25 x 1.5
  • Model id: din988-18x25
  • Standard: DIN 988:1990-03 · size 18x25

Lengths

Length (mm)Part keySimplified
0.1din988-18x25x0-1STEP
0.2din988-18x25x0-2STEP
0.3din988-18x25x0-3STEP
0.5din988-18x25x0-5STEP
1din988-18x25x1STEP
1.5din988-18x25x1-5STEP

Dimensions

Dimension symbols for 18x25 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter1818nominalL1
d2Outside diameter2525nominalL1

Drawing

Drawing of the 18x25 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-18x25.pdf.

The 18x25 shim washer beside the 17x24 and the 19x26

The 18x25 is number 16 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 18 mm on the 18x25 shim washer, against 17 mm on the 17x24 and 19 mm on the 19x26.
  • Outside diameter (d2): 25 mm on the 18x25 shim washer, against 24 mm on the 17x24 and 26 mm on the 19x26.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988, schrauben-lexikon-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-DS-18x25.pdf

CC-DIN988-DS-18x25 rev A Size datasheet - 18x25 '?) CommunityCAD DIN 988 18x25 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a18 mm shaft, in a 25 mm bore Thicknesses 01-0.2-0.3-0.5-1-1.5mm | Part keys din988-18x25x0-1 ... din988- 18x25x1-5 Files 6…

View full datasheet →

docs/CC-DIN988-SZ-18x25.pdf

DIN 988 shim ring, 18x25 Size drawing - 18x25 values on the views - h = 1.5 shown (the thickest file) - enlarged 5:1 d2 = 24.83 24.725-24.935 d1 = 18.14 18.05~18.23 d2 = 24.83 24.725-24.935 View from above Sym. Dimensi x25 18.14 18.05-18.23 di Bore, D12 (band middle) 24.83 24.725-24.935 Outside,…

View full datasheet →