18x25 Shim Washer, DIN 988 size drawing (PDF)

Datasheet — 18x25 Shim Washer, DIN 988 by Milo

Open the PDF
18x25 Shim Washer, DIN 988Get the CAD model18x25 Shim Washer, DIN 988CC-DIN988-SZ-18x25.pdf

Text of this datasheet

DIN 988 shim ring, 18x25

Size drawing - 18x25 values on the views - h = 1.5 shown (the thickest file) - enlarged 5:1

d2 = 24.83 24.725-24.935

d1 = 18.14 18.05~18.23

d2 = 24.83 24.725-24.935

View from above

Sym. Dimensi x25

18.14 18.05-18.23

di Bore, D12 (band middle)

24.83 24.725-24.935

Outside, d12 (band middle)

6.1 mm thickness, a file each e 0.2 mm 0.3 mm 6.5 mm

1 mm

1.5 mm

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 2.

Notes

d1 and d2: the middle of the D12 / d12 band; grey = the band's limits (ISO 286-2).

h: nominal = max; @ = a file at that thickness. Sharp edges: house conventions, D02.

TITLE

'? CommunityCAD Size drawing, 18x25

STANDARDS FOLLOWED

DIN 988:1990-03 (as tabulated) - ISO 286-2 (D12, d12)

FAMILY / DETAIL

Shim ring - 18x25

SHEET

CC-DIN988-SZ-18x25 A 5:1

REV SCALE PROJECTION

UNITS

Dimensions in mm

SPEC VERSION

LICENSE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC

PAGE

1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.