17x24 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
17x24 Shim Washer, DIN 988
1 / 4

17x24 Shim Washer, DIN 988

Made for 17x24 screws, this shim washer (DIN 988) has a 17 mm hole and is 24 mm across. Download it as 8 lengths from 0.1 to 2 mm, each as simplified STEP.

17x24 × 2 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 17x24 shim ring, 17x24 precision shim, 17x24 Passscheibe, 17x24 x 0.1 to 17x24 x 2
  • Model id: din988-17x24
  • Standard: DIN 988:1990-03 · size 17x24

Lengths

Length (mm)Part keySimplified
0.1din988-17x24x0-1STEP
0.15din988-17x24x0-15STEP
0.2din988-17x24x0-2STEP
0.3din988-17x24x0-3STEP
0.5din988-17x24x0-5STEP
1din988-17x24x1STEP
1.5din988-17x24x1-5STEP
2din988-17x24x2STEP

Dimensions

Dimension symbols for 17x24 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter1717nominalL1
d2Outside diameter2424nominalL1

Drawing

Drawing of the 17x24 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-17x24.pdf.

The 17x24 shim washer beside the 16x22 and the 18x25

The 17x24 is number 15 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 17 mm on the 17x24 shim washer, against 16 mm on the 16x22 and 18 mm on the 18x25.
  • Outside diameter (d2): 24 mm on the 17x24 shim washer, against 22 mm on the 16x22 and 25 mm on the 18x25.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988, schrauben-lexikon-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-DS-17x24.pdf

'?) CommunityCAD CC-DIN988-DS-17x24 rev A Size datasheet - 17x24 DIN 988 17x24 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a17 mm shaft, ina 24 mm bore Thicknesses 0.1-0.15-0.2-0.3-0.5-1-1.5- TI ae Part keys din988-17x24x0-1 ... din988- 17X24x2…

View full datasheet →

docs/CC-DIN988-SZ-17x24.pdf

DIN 988 shim ring, 17x24 Size drawing - 17x24 values on the views - h = 2 shown (the thickest file) - enlarged 5:1 ‘d2 = 23.83 23.725-23.935 d1 = 17.14 17.05-17.23 d2 = 23.83 23.725-23.935 View from above Sym. Dimensi 17x24 17.14 17.05-17.23 di Bore, D12 (band middle) 23.83 23.725-23.935 Outside,…

View full datasheet →