13x19 Shim Washer, DIN 988
Made for 13x19 screws, this shim washer (DIN 988) has a 13 mm hole and is 19 mm across. Download it as 5 lengths from 0.1 to 1 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 13x19 shim ring, 13x19 precision shim, 13x19 Passscheibe, 13x19 x 0.1 to 13x19 x 1
- Model id:
din988-13x19
- Standard: DIN 988:1990-03 · size 13x19
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 0.1 | din988-13x19x0-1 | STEP |
| 0.2 | din988-13x19x0-2 | STEP |
| 0.3 | din988-13x19x0-3 | STEP |
| 0.5 | din988-13x19x0-5 | STEP |
| 1 | din988-13x19x1 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | | 13 | | 13 | nominal | L1 |
| d2 | Outside diameter | | 19 | | 19 | nominal | L1 |
Drawing

As a PDF: CC-DIN988-SZ-13x19.pdf.
The 13x19 shim washer beside the 12x18 and the 14x20
The 13x19 is number 11 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.
- Inside diameter (d1): 13 mm on the 13x19 shim washer, against 12 mm on the 12x18 and 14 mm on the 14x20.
- Outside diameter (d2): 19 mm on the 13x19 shim washer, against 18 mm on the 12x18 and 20 mm on the 14x20.
Other sizes
Conventions
- Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
- Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
- Thickness h at its nominal, which is the maximum; one file per standard thickness.
Documents
Sources
fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...