m1-z40 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1-z40 Spur Gear, Spur gear
1 / 7

m1-z40 Spur Gear, Spur gear

The m1-z40 spur gear: reference (pitch) diameter 40 mm, tip (outside) diameter 42 mm, root diameter 37.5 mm. Available as simplified STEP files.

m1-z40 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1-z40 metric spur gear, m1-z40 involute gear, m1-z40 straight cut gear, m1-z40 pinion
  • Model id: spur-gears-m1-z40
  • Standard: Spur gear · size m1-z40

Files

Part keySimplified
spur-gears-m1-z40STEP

Dimensions

Dimension symbols for m1-z40 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter4040nominalL2
daTip (outside) diameter4242nominalL2
dfRoot diameter37.537.5nominalL0 (nom: one source)
dsBore diameter1010nominalL2
dhHub diameter3535nominalL2
bFace width1010nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter2020nominalL0 (nom: one source)
ds_hpcHPC's bore88nominalL0 (nom: one source)
LTotal length2020nominalL2

Drawing

Drawing of the m1-z40 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1-z40.pdf.

The m1-z40 spur gear beside the m1-z30 and the m1-z50

The m1-z40 is number 16 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 40 mm on the m1-z40 spur gear, against 30 mm on the m1-z30 and 50 mm on the m1-z50.
  • Tip (outside) diameter (da): 42 mm on the m1-z40 spur gear, against 32 mm on the m1-z30 and 52 mm on the m1-z50.
  • Root diameter (df): 37.5 mm on the m1-z40 spur gear, against 27.5 mm on the m1-z30 and 47.5 mm on the m1-z50.
  • Bore diameter (ds): 10 mm on the m1-z40 spur gear, the same on the m1-z30 and the m1-z50.
  • Hub diameter (dh): 35 mm on the m1-z40 spur gear, against 25 mm on the m1-z30 and 35 mm on the m1-z50.
  • Face width (b): 10 mm on the m1-z40 spur gear, the same on the m1-z30 and the m1-z50.
  • Hub width (lh): 10 mm on the m1-z40 spur gear, the same on the m1-z30 and the m1-z50.
  • HPC's hub (boss) diameter (dh_hpc): 20 mm on the m1-z40 spur gear, against 20 mm on the m1-z30 and 30 mm on the m1-z50.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-z40.pdf

'?) CommunityCAD CC-SPUR-DS-m1-240 rev A Size datasheet - m1-z40 Module 1, 40 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. SSS For meshing with other module 1 Poh gears on a parallel shaft Part key spur-gears-m1-z40 Pt Files 1 STEP AP214…

View full datasheet →

docs/CC-SPUR-SZ-m1-z40.pdf

Involute spur gear, ISO 53 basic rack, m1-z40 Size drawing - m1-z40 values on the views - enlarged 2.5:1 @d = 40.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →