m1-z30 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1-z30 Spur Gear, Spur gear
1 / 7

m1-z30 Spur Gear, Spur gear

The m1-z30 spur gear: reference (pitch) diameter 30 mm, tip (outside) diameter 32 mm, root diameter 27.5 mm. Available as simplified STEP files.

m1-z30 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1-z30 metric spur gear, m1-z30 involute gear, m1-z30 straight cut gear, m1-z30 pinion
  • Model id: spur-gears-m1-z30
  • Standard: Spur gear · size m1-z30

Files

Part keySimplified
spur-gears-m1-z30STEP

Dimensions

Dimension symbols for m1-z30 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter3030nominalL2
daTip (outside) diameter3232nominalL2
dfRoot diameter27.527.5nominalL0 (nom: one source)
dsBore diameter1010nominalL2
dhHub diameter2525nominalL2
bFace width1010nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter2020nominalL0 (nom: one source)
ds_hpcHPC's bore88nominalL0 (nom: one source)
LTotal length2020nominalL2

Drawing

Drawing of the m1-z30 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1-z30.pdf.

The m1-z30 spur gear beside the m1-z25 and the m1-z40

The m1-z30 is number 15 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 30 mm on the m1-z30 spur gear, against 25 mm on the m1-z25 and 40 mm on the m1-z40.
  • Tip (outside) diameter (da): 32 mm on the m1-z30 spur gear, against 27 mm on the m1-z25 and 42 mm on the m1-z40.
  • Root diameter (df): 27.5 mm on the m1-z30 spur gear, against 22.5 mm on the m1-z25 and 37.5 mm on the m1-z40.
  • Bore diameter (ds): 10 mm on the m1-z30 spur gear, against 8 mm on the m1-z25 and 10 mm on the m1-z40.
  • Hub diameter (dh): 25 mm on the m1-z30 spur gear, against 20 mm on the m1-z25 and 35 mm on the m1-z40.
  • Face width (b): 10 mm on the m1-z30 spur gear, the same on the m1-z25 and the m1-z40.
  • Hub width (lh): 10 mm on the m1-z30 spur gear, the same on the m1-z25 and the m1-z40.
  • HPC's hub (boss) diameter (dh_hpc): 20 mm on the m1-z30 spur gear, against 15 mm on the m1-z25 and 20 mm on the m1-z40.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-z30.pdf

'?) CommunityCAD CC-SPUR-DS-m1-z30 revA Size datasheet - m1-z30 Module 1, 30 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. —<—— For meshing with other module 1 Pit | gears on a parallel shaft Part key spur-gears-m1-z30 Pott | Files 1 STEP AP214…

View full datasheet →

docs/CC-SPUR-SZ-m1-z30.pdf

Involute spur gear, ISO 53 basic rack, m1-z30 Size drawing - m1-z30 values on the views - enlarged 3:1 @d = 30.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC boss…

View full datasheet →