m0.8-z40 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m0.8-z40 Spur Gear, Spur gear
1 / 7

m0.8-z40 Spur Gear, Spur gear

The m0.8-z40 spur gear: reference (pitch) diameter 32 mm, tip (outside) diameter 33.6 mm, root diameter 30 mm. Available as simplified STEP files.

m0.8-z40 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m0.8-z40 metric spur gear, m0.8-z40 involute gear, m0.8-z40 straight cut gear, m0.8-z40 pinion
  • Model id: spur-gears-m0-8-z40
  • Standard: Spur gear · size m0.8-z40

Files

Part keySimplified
spur-gears-m0-8-z40STEP

Dimensions

Dimension symbols for m0.8-z40 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter3232nominalL2
daTip (outside) diameter33.633.6nominalL2
dfRoot diameter3030nominalL0 (nom: one source)
dsBore diameter66nominalL2
dhHub diameter2828nominalL2
bFace width88nominalL2
lhHub width88nominalL2
dh_hpcHPC's hub (boss) diameter1616nominalL0 (nom: one source)
ds_hpcHPC's bore66nominalL0 (nom: one source)
LTotal length1616nominalL2

Drawing

Drawing of the m0.8-z40 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m0.8-z40.pdf.

The m0.8-z40 spur gear beside the m0.8-z30 and the m1-z15

The m0.8-z40 is number 11 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 32 mm on the m0.8-z40 spur gear, against 24 mm on the m0.8-z30 and 15 mm on the m1-z15.
  • Tip (outside) diameter (da): 33.6 mm on the m0.8-z40 spur gear, against 25.6 mm on the m0.8-z30 and 17 mm on the m1-z15.
  • Root diameter (df): 30 mm on the m0.8-z40 spur gear, against 22 mm on the m0.8-z30 and 12.5 mm on the m1-z15.
  • Bore diameter (ds): 6 mm on the m0.8-z40 spur gear, against 5 mm on the m0.8-z30 and 8 mm on the m1-z15.
  • Hub diameter (dh): 28 mm on the m0.8-z40 spur gear, against 20 mm on the m0.8-z30 and 17 mm on the m1-z15.
  • Face width (b): 8 mm on the m0.8-z40 spur gear, against 8 mm on the m0.8-z30 and 10 mm on the m1-z15.
  • Hub width (lh): 8 mm on the m0.8-z40 spur gear, against 8 mm on the m0.8-z30 and 20 mm on the m1-z15.
  • HPC's hub (boss) diameter (dh_hpc): 16 mm on the m0.8-z40 spur gear, against 16 mm on the m0.8-z30 and 12 mm on the m1-z15.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m0-8-z40.pdf

'?) CommunityCAD CC-SPUR-DS-m0-8-240 revA Size datasheet - m0.8-z40 Module 0.8, 40 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. m0.8-z40, end, 0.5:1 da df ds dh Th dhH dsH ha hf c p Dimension Reference (pitch) diameter Tip (outside) diameter Root…

View full datasheet →

docs/CC-SPUR-SZ-m0.8-z40.pdf

Involute spur gear, ISO 53 basic rack, m0.8-z40 Size drawing - m0.8-z40 values on the views - enlarged 3:1 Reference (pitch) diameter @d = 32.00 Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →