m1-z25 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1-z25 Spur Gear, Spur gear
1 / 7

m1-z25 Spur Gear, Spur gear

The m1-z25 spur gear: reference (pitch) diameter 25 mm, tip (outside) diameter 27 mm, root diameter 22.5 mm. Available as simplified STEP files.

m1-z25 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1-z25 metric spur gear, m1-z25 involute gear, m1-z25 straight cut gear, m1-z25 pinion
  • Model id: spur-gears-m1-z25
  • Standard: Spur gear · size m1-z25

Files

Part keySimplified
spur-gears-m1-z25STEP

Dimensions

Dimension symbols for m1-z25 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter2525nominalL2
daTip (outside) diameter2727nominalL2
dfRoot diameter22.522.5nominalL0 (nom: one source)
dsBore diameter88nominalL2
dhHub diameter2020nominalL2
bFace width1010nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter1515nominalL0 (nom: one source)
ds_hpcHPC's bore88nominalL0 (nom: one source)
LTotal length2020nominalL2

Drawing

Drawing of the m1-z25 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1-z25.pdf.

The m1-z25 spur gear beside the m1-z20 and the m1-z30

The m1-z25 is number 14 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 25 mm on the m1-z25 spur gear, against 20 mm on the m1-z20 and 30 mm on the m1-z30.
  • Tip (outside) diameter (da): 27 mm on the m1-z25 spur gear, against 22 mm on the m1-z20 and 32 mm on the m1-z30.
  • Root diameter (df): 22.5 mm on the m1-z25 spur gear, against 17.5 mm on the m1-z20 and 27.5 mm on the m1-z30.
  • Bore diameter (ds): 8 mm on the m1-z25 spur gear, against 8 mm on the m1-z20 and 10 mm on the m1-z30.
  • Hub diameter (dh): 20 mm on the m1-z25 spur gear, against 16 mm on the m1-z20 and 25 mm on the m1-z30.
  • Face width (b): 10 mm on the m1-z25 spur gear, the same on the m1-z20 and the m1-z30.
  • Hub width (lh): 10 mm on the m1-z25 spur gear, the same on the m1-z20 and the m1-z30.
  • HPC's hub (boss) diameter (dh_hpc): 15 mm on the m1-z25 spur gear, against 15 mm on the m1-z20 and 20 mm on the m1-z30.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-z25.pdf

'?) CommunityCAD CC-SPUR-DS-m1-z25 revA Size datasheet - m1-z25 Module 1, 25 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. For meshing with other module 1 gears on a parallel shaft Part key spur-gears-m1-z25 Files 1 STEP AP214 (simplified) m1-z25,…

View full datasheet →

docs/CC-SPUR-SZ-m1-z25.pdf

Involute spur gear, ISO 53 basic rack, m1-z25 Size drawing - m1-z25 values on the views - enlarged 3:1 Reference (pitch) diameter @d = 25.00 Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC boss…

View full datasheet →