m1.5-z50 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1.5-z50 Spur Gear, Spur gear
1 / 7

m1.5-z50 Spur Gear, Spur gear

The m1.5-z50 spur gear: reference (pitch) diameter 75 mm, tip (outside) diameter 78 mm, root diameter 71.25 mm. Available as simplified STEP files.

m1.5-z50 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1.5-z50 metric spur gear, m1.5-z50 involute gear, m1.5-z50 straight cut gear, m1.5-z50 pinion
  • Model id: spur-gears-m1-5-z50
  • Standard: Spur gear · size m1.5-z50

Files

Part keySimplified
spur-gears-m1-5-z50STEP

Dimensions

Dimension symbols for m1.5-z50 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter7575nominalL2
daTip (outside) diameter7878nominalL2
dfRoot diameter71.2571.25nominalL0 (nom: one source)
dsBore diameter1212nominalL2
dhHub diameter4545nominalL2
bFace width1515nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter4040nominalL0 (nom: one source)
ds_hpcHPC's bore1515nominalL0 (nom: one source)
LTotal length2525nominalL2

Drawing

Drawing of the m1.5-z50 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1.5-z50.pdf.

The m1.5-z50 spur gear beside the m1.5-z40 and the m1.5-z60

The m1.5-z50 is number 24 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 75 mm on the m1.5-z50 spur gear, against 60 mm on the m1.5-z40 and 90 mm on the m1.5-z60.
  • Tip (outside) diameter (da): 78 mm on the m1.5-z50 spur gear, against 63 mm on the m1.5-z40 and 93 mm on the m1.5-z60.
  • Root diameter (df): 71.25 mm on the m1.5-z50 spur gear, against 56.25 mm on the m1.5-z40 and 86.25 mm on the m1.5-z60.
  • Bore diameter (ds): 12 mm on the m1.5-z50 spur gear, against 12 mm on the m1.5-z40 and 15 mm on the m1.5-z60.
  • Hub diameter (dh): 45 mm on the m1.5-z50 spur gear, against 45 mm on the m1.5-z40 and 50 mm on the m1.5-z60.
  • Face width (b): 15 mm on the m1.5-z50 spur gear, the same on the m1.5-z40 and the m1.5-z60.
  • Hub width (lh): 10 mm on the m1.5-z50 spur gear, the same on the m1.5-z40 and the m1.5-z60.
  • HPC's hub (boss) diameter (dh_hpc): 40 mm on the m1.5-z50 spur gear, the same on the m1.5-z40 and the m1.5-z60.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-5-z50.pdf

'?) CommunityCAD CC-SPUR-DS-m1-5-z50 revA Size datasheet - m1.5-z50 Module 1.5, 50 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. da df ds dh Th dhH dsH ha hf c p m1.5-z50, end, 0.5:1 Dimension Reference (pitch) diameter Tip (outside) diameter Root…

View full datasheet →

docs/CC-SPUR-SZ-m1.5-z50.pdf

Involute spur gear, ISO 53 basic rack, m1.5-z50 Size drawing - m1.5-z50 values on the views - enlarged 1.5:1 @d = 75.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →