m1.5-z15 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1.5-z15 Spur Gear, Spur gear
1 / 7

m1.5-z15 Spur Gear, Spur gear

The m1.5-z15 spur gear: reference (pitch) diameter 22.5 mm, tip (outside) diameter 25.5 mm, root diameter 18.75 mm. Available as simplified STEP files.

m1.5-z15 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1.5-z15 metric spur gear, m1.5-z15 involute gear, m1.5-z15 straight cut gear, m1.5-z15 pinion
  • Model id: spur-gears-m1-5-z15
  • Standard: Spur gear · size m1.5-z15

Files

Part keySimplified
spur-gears-m1-5-z15STEP

Dimensions

Dimension symbols for m1.5-z15 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter22.522.5nominalL2
daTip (outside) diameter25.525.5nominalL2
dfRoot diameter18.7518.75nominalL0 (nom: one source)
dsBore diameter88nominalL2
dhHub diameter1818nominalL2
bFace width1515nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter1818nominalL0 (nom: one source)
ds_hpcHPC's bore88nominalL0 (nom: one source)
LTotal length2525nominalL2

Drawing

Drawing of the m1.5-z15 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1.5-z15.pdf.

The m1.5-z15 spur gear beside the m1-z60 and the m1.5-z20

The m1.5-z15 is number 19 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 22.5 mm on the m1.5-z15 spur gear, against 60 mm on the m1-z60 and 30 mm on the m1.5-z20.
  • Tip (outside) diameter (da): 25.5 mm on the m1.5-z15 spur gear, against 62 mm on the m1-z60 and 33 mm on the m1.5-z20.
  • Root diameter (df): 18.75 mm on the m1.5-z15 spur gear, against 57.5 mm on the m1-z60 and 26.25 mm on the m1.5-z20.
  • Bore diameter (ds): 8 mm on the m1.5-z15 spur gear, against 10 mm on the m1-z60 and 8 mm on the m1.5-z20.
  • Hub diameter (dh): 18 mm on the m1.5-z15 spur gear, against 35 mm on the m1-z60 and 24 mm on the m1.5-z20.
  • Face width (b): 15 mm on the m1.5-z15 spur gear, against 10 mm on the m1-z60 and 15 mm on the m1.5-z20.
  • Hub width (lh): 10 mm on the m1.5-z15 spur gear, the same on the m1-z60 and the m1.5-z20.
  • HPC's hub (boss) diameter (dh_hpc): 18 mm on the m1.5-z15 spur gear, against 30 mm on the m1-z60 and 20 mm on the m1.5-z20.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-5-z15.pdf

'?) CommunityCAD CC-SPUR-DS-m1-5-z15 revA Size datasheet - m1.5-z15 Module 1.5, 15 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. m1.5-215, end, 0.75:1 da df ds dh Th dhH dsH ha hf c p Dimension Reference (pitch) diameter Tip (outside) diameter Root…

View full datasheet →

docs/CC-SPUR-SZ-m1.5-z15.pdf

Involute spur gear, ISO 53 basic rack, m1.5-z15 Size drawing - m1.5-z15 values on the views - enlarged 3:1 m1.5-z15 Reference (pitch) diameter 22.50 @d = 22.50 Tip (outside) diameter 25.50 18.75* Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2)…

View full datasheet →