40x20x5 Block Magnet, Neodymium
The 40x20x5 block magnet (Neodymium block magnet) is 40 mm long, 20 mm wide and 5 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 40x20x5 bar magnet, 40x20x5 rectangular magnet, 40x20x5 rare earth magnet, 40x20x5 neodymium magnet
- Model id:
magnets-block-40x20x5
- Standard: Neodymium block magnet · size 40x20x5
Files
| Part key | Simplified |
|---|
magnets-block-40x20x5 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Length | | 40 | | 40 | nominal | L1 |
| W | Width | | 20 | | 20 | nominal | L1 |
| H | Height | | 5 | | 5 | nominal | L1 |
Drawing

As a PDF: CC-MAGBLOCK-SZ-40x20x5.pdf.
What each maker states
- supermagnete lists this size in N42.
- first4magnets lists this size in N52.
- The shape is the same in any grade.
The 40x20x5 block magnet beside the 40x10x5 and the 40x20x10
The 40x20x5 is number 19 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.
- Length (L): 40 mm on the 40x20x5 block magnet, the same on the 40x10x5 and the 40x20x10.
- Width (W): 20 mm on the 40x20x5 block magnet, against 10 mm on the 40x10x5 and 20 mm on the 40x20x10.
- Height (H): 5 mm on the 40x20x5 block magnet, against 5 mm on the 40x10x5 and 10 mm on the 40x20x10.
Other sizes
- One size smaller: 40x10x5 Block Magnet, Neodymium, 40 mm long, 10 mm wide, 5 mm high, nickel-plated, axially magnetised.
- One size larger: 40x20x10 Block Magnet, Neodymium, 40 mm long, 20 mm wide, 10 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...