23x76 Stepper Motor, NEMA ICS 16
NEMA 23, 76 mm body: the 23x76 stepper motor (NEMA ICS 16) has four 5.207 mm holes 47.146 mm apart, a 38.1 mm pilot and a 6.35 mm shaft. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 23x76 NEMA stepper, 23x76 hybrid stepper motor, 23x76 stepping motor
- Model id:
nema-steppers-23x76
- Standard: NEMA ICS 16 · size 23x76
Files
| Part key | Simplified |
|---|
nema-steppers-23x76 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 76 | | 76 | nominal | L0 (nom: one source) |
| BD | Body square | | 56.4 | | 56.4 | nominal | L1 |
| A | Mounting hole spacing | | 47.146 | | 47.146 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 5.207 | | 5.207 | nominal | L1 |
| N | Pilot diameter | | 38.1 | | 38.1 | nominal | L1 |
| T | Pilot height | 1.524 | 1.6 | 3.302 | 1.6 | nominal | L1 |
| D | Shaft diameter | | 6.35 | | 6.35 | nominal | L1 |
| E | Shaft length | | 21 | | 21 | nominal | L1 |
| F | Shaft flat | | 5.8 | | 5.8 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 15 | | 15 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-23x76.pdf.
The 23x76 stepper motor beside the 23x55 and the 34x67
The 23x76 is number 15 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 76 mm on the 23x76 stepper motor, against 55 mm on the 23x55 and 67 mm on the 34x67.
- Body square (BD): 56.4 mm on the 23x76 stepper motor, against 56.4 mm on the 23x55 and 86 mm on the 34x67.
- Mounting hole spacing (A): 47.146 mm on the 23x76 stepper motor, against 47.146 mm on the 23x55 and 69.597 mm on the 34x67.
- Number of mounting holes (nh): 4 on the 23x76 stepper motor, the same on the 23x55 and the 34x67.
- Mounting hole diameter (dh): 5.207 mm on the 23x76 stepper motor, against 5.207 mm on the 23x55 and 6.6 mm on the 34x67.
- Pilot diameter (N): 38.1 mm on the 23x76 stepper motor, against 38.1 mm on the 23x55 and 73.025 mm on the 34x67.
- Pilot height (T): 1.6 mm on the 23x76 stepper motor, against 1.6 mm on the 23x55 and 2.03 mm on the 34x67.
- Shaft diameter (D): 6.35 mm on the 23x76 stepper motor, against 6.35 mm on the 23x55 and 12.7 mm on the 34x67.
Other sizes
- One size smaller: 23x55 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 55 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
- One size larger: 34x67 Stepper Motor, NEMA ICS 16, NEMA 34, 86 mm square, 67 mm long, 12.7 mm shaft, 6.6 mm mounting holes 69.597 mm apart, Anaheim Automation, Leadshine, Lin Engineering and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-23y, engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...