23x55 Stepper Motor, NEMA ICS 16
55 mm long behind a 56.4 mm square face, the 23x55 stepper motor (NEMA ICS 16) mounts by four 5.207 mm holes 47.146 mm apart around a 38.1 mm pilot; its shaft is 6.35 mm across, 21 mm long, flatted to 5.8 mm. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 23x55 NEMA stepper, 23x55 hybrid stepper motor, 23x55 stepping motor
- Model id:
nema-steppers-23x55
- Standard: NEMA ICS 16 · size 23x55
Files
| Part key | Simplified |
|---|
nema-steppers-23x55 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 55 | | 55 | nominal | L0 (nom: one source) |
| BD | Body square | | 56.4 | | 56.4 | nominal | L1 |
| A | Mounting hole spacing | | 47.146 | | 47.146 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 5.207 | | 5.207 | nominal | L1 |
| N | Pilot diameter | | 38.1 | | 38.1 | nominal | L1 |
| T | Pilot height | 1.524 | 1.6 | 3.302 | 1.6 | nominal | L1 |
| D | Shaft diameter | | 6.35 | | 6.35 | nominal | L1 |
| E | Shaft length | | 21 | | 21 | nominal | L1 |
| F | Shaft flat | | 5.8 | | 5.8 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 15 | | 15 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-23x55.pdf.
The 23x55 stepper motor beside the 23x41 and the 23x76
The 23x55 is number 14 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 55 mm on the 23x55 stepper motor, against 41 mm on the 23x41 and 76 mm on the 23x76.
- Body square (BD): 56.4 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Mounting hole spacing (A): 47.146 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Number of mounting holes (nh): 4 on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Mounting hole diameter (dh): 5.207 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Pilot diameter (N): 38.1 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Pilot height (T): 1.6 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
- Shaft diameter (D): 6.35 mm on the 23x55 stepper motor, the same on the 23x41 and the 23x76.
Other sizes
- One size smaller: 23x41 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 41 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
- One size larger: 23x76 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 76 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-23y, engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...