34x67 Stepper Motor, NEMA ICS 16
The 34x67 stepper motor (NEMA ICS 16) is a NEMA 34 frame: a body 86 mm square and 67 mm long, four 6.6 mm holes 69.597 mm apart, a 73.025 mm pilot and a 12.7 mm shaft 37.1 mm long. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 34x67 NEMA stepper, 34x67 hybrid stepper motor, 34x67 stepping motor
- Model id:
nema-steppers-34x67
- Standard: NEMA ICS 16 · size 34x67
Files
| Part key | Simplified |
|---|
nema-steppers-34x67 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 67 | | 67 | nominal | L0 (nom: one source) |
| BD | Body square | | 86 | | 86 | nominal | L1 |
| A | Mounting hole spacing | | 69.597 | | 69.597 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 6.6 | | 6.6 | nominal | L1 |
| N | Pilot diameter | | 73.025 | | 73.025 | nominal | L1 |
| T | Pilot height | 1.524 | 2.03 | 3.302 | 2.03 | nominal | L1 |
| D | Shaft diameter | | 12.7 | | 12.7 | nominal | L1 |
| E | Shaft length | | 37.1 | | 37.1 | nominal | L1 |
| F | Shaft flat | | 11.4 | | 11.4 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 25.4 | | 25.4 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-34x67.pdf.
The 34x67 stepper motor beside the 23x76 and the 34x80
The 34x67 is number 16 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 67 mm on the 34x67 stepper motor, against 76 mm on the 23x76 and 80 mm on the 34x80.
- Body square (BD): 86 mm on the 34x67 stepper motor, against 56.4 mm on the 23x76 and 86 mm on the 34x80.
- Mounting hole spacing (A): 69.597 mm on the 34x67 stepper motor, against 47.146 mm on the 23x76 and 69.597 mm on the 34x80.
- Number of mounting holes (nh): 4 on the 34x67 stepper motor, the same on the 23x76 and the 34x80.
- Mounting hole diameter (dh): 6.6 mm on the 34x67 stepper motor, against 5.207 mm on the 23x76 and 6.5 mm on the 34x80.
- Pilot diameter (N): 73.025 mm on the 34x67 stepper motor, against 38.1 mm on the 23x76 and 73.025 mm on the 34x80.
- Pilot height (T): 2.03 mm on the 34x67 stepper motor, against 1.6 mm on the 23x76 and 2.03 mm on the 34x80.
- Shaft diameter (D): 12.7 mm on the 34x67 stepper motor, against 6.35 mm on the 23x76 and 12.7 mm on the 34x80.
Other sizes
- One size smaller: 23x76 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 76 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
- One size larger: 34x80 Stepper Motor, NEMA ICS 16, NEMA 34, 86 mm square, 80 mm long, 12.7 mm shaft, 6.5 mm mounting holes 69.597 mm apart, Anaheim Automation, Leadshine, Lin Engineering and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-34y, anaheim-34y-figures, engineersedge-ics16-inch-flanges, leadshine-cm-steppers, lin-8718s-05s-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...