17x48 Stepper Motor, NEMA ICS 16
48 mm long behind a 42.3 mm square face, the 17x48 stepper motor (NEMA ICS 16) mounts by four M3 holes 30.982 mm apart around a 21.99894 mm pilot; its shaft is 5 mm across, 24 mm long, flatted to 4.5 mm. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 17x48 NEMA stepper, 17x48 hybrid stepper motor, 17x48 stepping motor
- Model id:
nema-steppers-17x48
- Standard: NEMA ICS 16 · size 17x48
Files
| Part key | Simplified |
|---|
nema-steppers-17x48 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 48 | | 48 | nominal | L0 (nom: one source) |
| BD | Body square | | 42.3 | | 42.3 | nominal | L1 |
| A | Mounting hole spacing | | 30.982 | | 30.982 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L1 |
| N | Pilot diameter | | 21.99894 | | 21.99894 | nominal | L1 |
| T | Pilot height | 0.762 | 2 | 2.286 | 2 | nominal | L1 |
| D | Shaft diameter | | 5 | | 5 | nominal | L1 |
| E | Shaft length | | 24 | | 24 | nominal | L1 |
| F | Shaft flat | | 4.5 | | 4.5 | nominal | L1 |
| Lf | Flat length | | 15 | | 15 | nominal | L1 |
Drawing

As a PDF: CC-NEMA-SZ-17x48.pdf.
The 17x48 stepper motor beside the 17x40 and the 17x60
The 17x48 is number 11 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 48 mm on the 17x48 stepper motor, against 40 mm on the 17x40 and 60 mm on the 17x60.
- Body square (BD): 42.3 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Mounting hole spacing (A): 30.982 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Number of mounting holes (nh): 4 on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Mounting hole thread (dt): 3 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Pilot diameter (N): 21.99894 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Pilot height (T): 2 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
- Shaft diameter (D): 5 mm on the 17x48 stepper motor, the same on the 17x40 and the 17x60.
Other sizes
- One size smaller: 17x40 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 40 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
- One size larger: 17x60 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 60 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...