MR104 Miniature Ball Bearing

STL Supports CommunityCAD0 downloads
MR104 Miniature Ball Bearing
1 / 5

MR104 Miniature Ball Bearing

For a 4 mm shaft and a 10 mm housing bore, the MR104 miniature ball bearing (MR series) is 3 mm wide. Modeled as simplified STEP files.

MR104 miniature ball bearing, MR series

How these parts are made, and what the levels mean: read the method

  • Also known as: MR104 MR bearing, MR104 miniature deep groove ball bearing, MR104 small ball bearing
  • Model id: bearings-miniature-mr104
  • Standard: MR series · size MR104

Files

Part keySimplified
bearings-miniature-mr104STEP

Dimensions

Dimension symbols for MR104 miniature ball bearings (MR series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter44nominalL1
DOutside diameter1010nominalL1
BWidth33nominalL1
rChamfer dimension0.150.15single limit (min), modeled at the limitL1

Drawing

Drawing of the MR104 miniature ball bearing with its values (MR series)

As a PDF: CC-BRG-MINI-SZ-MR104.pdf.

The MR104 miniature ball bearing beside the MR84 and the MR85

The MR104 is number 4, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.

  • Bore diameter (d): 4 mm on the MR104 miniature ball bearing, against 4 mm on the MR84 and 5 mm on the MR85.
  • Outside diameter (D): 10 mm on the MR104 miniature ball bearing, against 8 mm on the MR84 and 8 mm on the MR85.
  • Width (B): 3 mm on the MR104 miniature ball bearing, against 2 mm on the MR84 and 2 mm on the MR85.
  • Chamfer dimension (r): at least 0.15 mm on the MR104 miniature ball bearing, against at least 0.1 mm on the MR84 and at least 0.08 mm on the MR85.

The MR104 miniature ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-DS-MR104.pdf

CC-BRG-MINI-DS-MR104 rev A Size datasheet - MR104 '?) CommunityCAD MR series MR104 miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 4mm shafts Part keys bearings- miniature-mr104, bearings - miniature -mr104-…

View full datasheet →

docs/CC-BRG-MINI-SZ-MR104.pdf

Miniature deep groove ball bearing, MR series, MR104 Size drawing - MR104 values on the views - MR104ZZ shown. Built from: open MR104 - 2Z MR104ZZ - 2RS MR104ZZ - enlarged 5:1 Bearing MR104 10.000 MR1042Z 10.000 Source levels d = 4.000 Main value = the modeled value (nominal, else the middle of…

View full datasheet →