MR105 Miniature Ball Bearing
The MR105 miniature ball bearing (MR series) has a 5 mm bore, a 10 mm outside diameter and a width of 3 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: MR105 MR bearing, MR105 miniature deep groove ball bearing, MR105 small ball bearing
- Model id:
bearings-miniature-mr105
- Standard: MR series · size MR105
Files
| Part key | Simplified |
|---|
bearings-miniature-mr105 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 10 | | 10 | nominal | L1 |
| B | Width | | 3 | | 3 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR105.pdf.
The MR105 miniature ball bearing beside the MR95 and the MR106
The MR105 is number 7, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.
- Bore diameter (d): 5 mm on the MR105 miniature ball bearing, against 5 mm on the MR95 and 6 mm on the MR106.
- Outside diameter (D): 10 mm on the MR105 miniature ball bearing, against 9 mm on the MR95 and 10 mm on the MR106.
- Width (B): 3 mm on the MR105 miniature ball bearing, against 2.5 mm on the MR95 and 2.5 mm on the MR106.
- Chamfer dimension (r): at least 0.1 mm on the MR105 miniature ball bearing, the same on the MR95 and the MR106.
The MR105 miniature ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...