MR95 Miniature Ball Bearing
For a 5 mm shaft and a 9 mm housing bore, the MR95 miniature ball bearing (MR series) is 2.5 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: MR95 MR bearing, MR95 miniature deep groove ball bearing, MR95 small ball bearing
- Model id:
bearings-miniature-mr95
- Standard: MR series · size MR95
Files
| Part key | Simplified |
|---|
bearings-miniature-mr95 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 9 | | 9 | nominal | L1 |
| B | Width | | 2.5 | | 2.5 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR95.pdf.
The MR95 miniature ball bearing beside the MR85 and the MR105
The MR95 is number 6, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.
- Bore diameter (d): 5 mm on the MR95 miniature ball bearing, the same on the MR85 and the MR105.
- Outside diameter (D): 9 mm on the MR95 miniature ball bearing, against 8 mm on the MR85 and 10 mm on the MR105.
- Width (B): 2.5 mm on the MR95 miniature ball bearing, against 2 mm on the MR85 and 3 mm on the MR105.
- Chamfer dimension (r): at least 0.1 mm on the MR95 miniature ball bearing, against at least 0.08 mm on the MR85 and at least 0.1 mm on the MR105.
The MR95 miniature ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...