MR84 Miniature Ball Bearing

STL Supports CommunityCAD0 downloads
MR84 Miniature Ball Bearing
1 / 5

MR84 Miniature Ball Bearing

The MR84 miniature ball bearing (MR series) has a 4 mm bore, an 8 mm outside diameter and a width of 2 mm. Get it as simplified STEP files.

MR84 miniature ball bearing, MR series

How these parts are made, and what the levels mean: read the method

  • Also known as: MR84 MR bearing, MR84 miniature deep groove ball bearing, MR84 small ball bearing
  • Model id: bearings-miniature-mr84
  • Standard: MR series · size MR84

Files

Part keySimplified
bearings-miniature-mr84STEP

Dimensions

Dimension symbols for MR84 miniature ball bearings (MR series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter44nominalL1
DOutside diameter88nominalL1
BWidth22nominalL1
rChamfer dimension0.10.1single limit (min), modeled at the limitL1

Drawing

Drawing of the MR84 miniature ball bearing with its values (MR series)

As a PDF: CC-BRG-MINI-SZ-MR84.pdf.

The MR84 miniature ball bearing beside the MR74 and the MR104

The MR84 is number 3, counting from the smallest, of the 12 MR series miniature ball bearings published here, from MR63 to MR148.

  • Bore diameter (d): 4 mm on the MR84 miniature ball bearing, the same on the MR74 and the MR104.
  • Outside diameter (D): 8 mm on the MR84 miniature ball bearing, against 7 mm on the MR74 and 10 mm on the MR104.
  • Width (B): 2 mm on the MR84 miniature ball bearing, against 2 mm on the MR74 and 3 mm on the MR104.
  • Chamfer dimension (r): at least 0.1 mm on the MR84 miniature ball bearing, against at least 0.08 mm on the MR74 and at least 0.15 mm on the MR104.

The MR84 miniature ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-DS-MR84.pdf

CC-BRG-MINI-DS-MR84 rev A Size datasheet - MR84 '?) CommunityCAD MR series MR84 miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 4mm shafts Part keys bearings- miniature -mr84, bearings - miniature - mr84- 2z,…

View full datasheet →

docs/CC-BRG-MINI-SZ-MR84.pdf

Miniature deep groove ball bearing, MR series, MR84 Size drawing - MR84 values on the views - MR84ZZ shown. Built from: open MR84 - 2Z MR84ZZ - 2RS MR84ZZ - enlarged 10:1 View fro} Bearing MR84 MR84ZZ Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →