92x25 Cooling Fan, DC Axial
A 92 mm square cooling fan, 25.4 mm thick, with 4.3 mm mounting holes 82.5 mm apart. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 92x25 computer fan, 92x25 case fan, 92x25 DC brushless fan
- Model id:
fans-dc-axial-92x25
- Standard: DC axial fan · size 92x25
Files
| Part key | Simplified |
|---|
fans-dc-axial-92x25 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 92 | | 92 | nominal | L1 |
| t | Frame thickness | | 25.4 | | 25.4 | nominal | L1 |
| e | Mounting hole spacing | | 82.5 | | 82.5 | nominal | L1 |
| dh | Mounting hole diameter | | 4.3 | | 4.3 | nominal | L1 |
| k | Corner flange thickness | | 4 | | 4 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-92x25.pdf.
From the maker's data sheet
As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.
- Series: MR9225
- Models: MR9225L
- Operating Voltage: 12 or 24 VDC
- Bearing option: ball bearing or sleeve
- Air Flow: air exhaust over struts
- Features: soft start, polarity protection, auto-restart
- Options: tachometer output or locked rotor alarm signal; PWM speed control
The 92x25 cooling fan beside the 80x38 and the 92x38
The 92x25 is number 15 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 92 mm on the 92x25 cooling fan, against 80 mm on the 80x38 and 92 mm on the 92x38.
- Frame thickness (t): 25.4 mm on the 92x25 cooling fan, against 38 mm on the 80x38 and 38 mm on the 92x38.
- Mounting hole spacing (e): 82.5 mm on the 92x25 cooling fan, against 71.5 mm on the 80x38 and 82.5 mm on the 92x38.
- Mounting hole diameter (dh): 4.3 mm on the 92x25 cooling fan, against 4.3 mm on the 80x38 and 4.5 mm on the 92x38.
- Corner flange thickness (k): 4 mm on the 92x25 cooling fan, the same on the 80x38.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
delta-dc-axial, mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...