80x38 Cooling Fan, DC Axial
The 80x38 cooling fan is 38 mm thick on an 80 mm square frame; it mounts by 4.3 mm mounting holes 71.5 mm apart. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 80x38 computer fan, 80x38 case fan, 80x38 DC brushless fan
- Model id:
fans-dc-axial-80x38
- Standard: DC axial fan · size 80x38
Files
| Part key | Simplified |
|---|
fans-dc-axial-80x38 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| a | Frame side | | 80 | | 80 | nominal | L1 |
| t | Frame thickness | | 38 | | 38 | nominal | L1 |
| e | Mounting hole spacing | | 71.5 | | 71.5 | nominal | L1 |
| dh | Mounting hole diameter | | 4.3 | | 4.3 | nominal | L1 |
| k | Corner flange thickness | | 4 | | 4 | nominal | L1 |
Drawing

As a PDF: CC-DCFAN-SZ-80x38.pdf.
From the maker's data sheet
As written on the Mechatronics data sheet for this frame (mechatronics-dc-axial), one of the sheets this size's dimensions come from: the series, its models and features.
- Series: MR8038
- Models: MR8038S
- Operating Voltage: 12 or 24 VDC
- Bearing option: ball bearing or sleeve
- Air Flow: air exhaust over struts
- Features: soft start, polarity protection, auto-restart
- Options: tachometer output or locked rotor alarm signal; PWM speed control
The 80x38 cooling fan beside the 80x25 and the 92x25
The 80x38 is number 14 of the 18 DC axial fan cooling fans published here, listed from 25x10 to 120x38.
- Frame side (a): 80 mm on the 80x38 cooling fan, against 80 mm on the 80x25 and 92 mm on the 92x25.
- Frame thickness (t): 38 mm on the 80x38 cooling fan, against 25.4 mm on the 80x25 and 25.4 mm on the 92x25.
- Mounting hole spacing (e): 71.5 mm on the 80x38 cooling fan, against 71.5 mm on the 80x25 and 82.5 mm on the 92x25.
- Mounting hole diameter (dh): 4.3 mm on the 80x38 cooling fan, against 4.5 mm on the 80x25 and 4.3 mm on the 92x25.
- Corner flange thickness (k): 4 mm on the 80x38 cooling fan, the same on the 92x25.
Other sizes
Conventions
- Simplified only: frame, mounting holes, illustrative rotor; frame and blades as two coloured solids. STEP AP214, millimetres, Z along the fan axis, outlet (strut) face at Z = 0, intake (front) at Z = t, airflow toward -Z.
- Blades are illustrative, not any maker's design; frame, mounting holes and outline are from maker drawings.
- Venturi bore (a + e)/2, hub, four struts, swept blades (seven from 60 mm, five below), rounded corners, edge fillets and chamfers and corner pockets are illustrative house rules, not any maker's dimensions.
Documents
Sources
mechatronics-dc-axial, sunon-dc-fan-255e. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...