slot10-40 Slot Cover (Slot Cover Strip), Extrusion slot cover

The slot10-40 slot cover (Extrusion slot cover): face width 10 mm, depth 13 mm, leg width 11 mm. Available as 14 lengths from 100 to 2000 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: slot10-40 slot cover, slot10-40 x 100 to slot10-40 x 2000 slot covers
• Model id: extrusion-slot-covers-slot10-40
• Standard: Extrusion slot cover · size slot10-40

Lengths

Length (mm)	Part key	Simplified
100	extrusion-slot-covers-slot10-40x100	STEP
150	extrusion-slot-covers-slot10-40x150	STEP
200	extrusion-slot-covers-slot10-40x200	STEP
250	extrusion-slot-covers-slot10-40x250	STEP
300	extrusion-slot-covers-slot10-40x300	STEP
350	extrusion-slot-covers-slot10-40x350	STEP
400	extrusion-slot-covers-slot10-40x400	STEP
450	extrusion-slot-covers-slot10-40x450	STEP
500	extrusion-slot-covers-slot10-40x500	STEP
600	extrusion-slot-covers-slot10-40x600	STEP
750	extrusion-slot-covers-slot10-40x750	STEP
1000	extrusion-slot-covers-slot10-40x1000	STEP
1500	extrusion-slot-covers-slot10-40x1500	STEP
2000	extrusion-slot-covers-slot10-40x2000	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
b	Face width		10		10	nominal	L1
h	Depth		13		13	nominal	L1
b1	Leg width		11		11	nominal	L0 (nom: one source)
b2	Open-side gap		5.6		5.6	nominal	L0 (nom: one source)
t	Face thickness		0.7		0.7	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-SLOTCOVER-SZ-slot10-40.pdf.

The slot10-40 slot cover beside the 40-i8 and the slot10-45

The slot10-40 is number 4 of the 5 Extrusion slot cover slot covers published here, listed from 20-b6 to slot10-45.

• Face width (b): 10 mm on the slot10-40 slot cover, against 8 mm on the 40-i8 and 10 mm on the slot10-45.
• Depth (h): 13 mm on the slot10-40 slot cover, against 11 mm on the 40-i8 and 13 mm on the slot10-45.
• Leg width (b1): 11 mm on the slot10-40 slot cover, against 9.4 mm on the 40-i8 and 11 mm on the slot10-45.
• Open-side gap (b2): 5.6 mm on the slot10-40 slot cover, against 6.6 mm on the 40-i8 and 5.6 mm on the slot10-45.
• Face thickness (t): 0.7 mm on the slot10-40 slot cover, the same on the slot10-45.

Other sizes

• One size smaller: 40-i8 Slot Cover (Slot Cover Strip), Extrusion slot cover.
• One size larger: slot10-45 Slot Cover (Slot Cover Strip), Extrusion slot cover.

Documents

• CC-SLOTCOVER-DS-slot10-40.pdf: slot10-40 datasheet: values with levels, lengths, sources
• CC-SLOTCOVER-SZ-slot10-40.pdf: slot10-40 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

kipp-k1054, misumi-slot-covers. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.